Overview
The Baer Brakes 2141019 is a front Big Claw disc brake rotor kit for Dodge and Ram 1500 trucks, covering 2006–2010, 2011–2018 and 2019–2024 Ram 1500 Classic models. Each kit provides two larger than stock, purpose-cast rotors and a pair of caliper relocation brackets that move the calipers outward.
The one-piece conventional rotor has a cross-drilled and slotted face and curved directional vanes. Baer keeps the OE pads and hardware in service, so the change is in rotor diameter and cooling. It fits owners who want more braking leverage at the front axle of a Ram 1500 without a new pad system.
Key features
- Rotors up to 2 inches larger on some applications provide more brake torque.
- Cross-drilled and slotted surface helps vent dust and gases for steady pedal feel.
- Directional vanes pull air through the rotor to improve cooling and reduce fade.
- Caliper relocation brackets keep OE pads and hardware in use.
- Zinc-plated finish helps resist rust and corrosion.
- Direct bolt-on fitting, and the brakes do not need bleeding afterward.
Front brake upgrade basics
A larger front rotor changes how the brakes behave under load, so it is worth thinking about how the truck is used. Front brakes carry most of the stopping force when the truck is loaded, and a rotor with more diameter gives the pads more leverage. Owners who tow or drive steep grades often notice the difference most, while daily driving may feel similar to stock.
Front pads should be matched to the rotor and kept in good condition, and the caliper slide pins should move freely after installation. Brake fluid absorbs moisture over time, so it should be replaced at a regular interval. Inspect the rotors for cracks, deep scoring or a lip at the edge when pads are changed, and replace any rotor that falls below its minimum thickness.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2141019 |
| UPC | 90127866153 |
| Axle | Front |
| Drive | 2WD, 4WD |
| Rotor type | Conventional |
| Construction | One piece, full cast |
| Material | Cast iron |
| Surface type | Slotted X Drilled |
| Vent design | Curved |
| Brake surface | Directional |
| Disc finish | Zinc plated, rust resistant coating |
| Outside diameter | 15 |
| Nominal thickness | 1.1 |
| Discard thickness | 1.02 |
| Overall height | 2.654 |
| Center hole diameter | 3.095 |
| Mounting bolt hole circle diameter | 5.5 |
| Mounting bolt hole diameter | 0.688 |
| Stud/lug hole quantity | 5 |
| Floating | Yes |
| ABS tone ring included | No |
| Grade | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Warranty | Limited 1 Year Warranty |
Vehicle fitment
The kit fits 2006–2010 Dodge Ram 1500, 2011–2018 Ram 1500 and 2019–2024 Ram 1500 Classic trucks in 2WD and 4WD. The application uses a 5×139.7mm bolt pattern.
This list does not include Ram 2500 or Ram 3500 trucks, or the 2019–2025 new body Ram 1500 front kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the wheel bolt pattern is 5×139.7mm before installing. Use Baer’s template with the spare tire and wheel to check clearance, then confirm the caliper clears the larger rotor once the brackets are mounted. Test the brakes at low speed before normal driving.
What’s included
The kit includes a pair of front rotors and a pair of caliper relocation brackets.
Not included: OE brake pads and hardware, which the kit is designed to keep in use.
