Overview
The Auto Meter Z-Series Electric Fuel Pressure Gauge, part number 2660, is an electric gauge that reads fuel pressure on a 2 1/16 inch face. It uses a rugged air core meter and has an all black design that Auto Meter says gives a factory look.
The gauge has a precision movement, white illumination and a 1 Year Limited Warranty. Being universal fit, it is not built for one specific vehicle.
Key features
- Rugged air core meter
- All black design for a factory look
- Precision movement, described by Auto Meter for extreme accuracy
- White illumination
- 1 Year Limited Warranty
Fuel pressure monitoring basics
Fuel pressure gauges give the most useful information when they are watched during normal operation and under load. A reading that drops as the engine works harder can point to a weak pump, a restricted filter or a leak. Record the reading at idle and at load so changes are easy to spot.
Electric sending units wear over time, and a gauge only reflects what the sender reports. Inspect the wiring and connector for corrosion before blaming the gauge, and review the filter and pump service history. Any fuel leak should be fixed before the gauge is installed in the engine bay or cabin.
- Log readings at idle and under load
- Inspect the sender wiring for corrosion
- Repair any fuel leak before final mounting
Specifications
| Brand | Auto Meter |
|---|---|
| Part number | 2660 |
| UPC | 46074026607 |
| Gauge type | Fuel pressure |
| Gauge series | Z-Series |
| Electric or mechanical | Electric |
| Gauge mounting size | 2 1/16 inches |
| Illumination | White |
| Face color | Black |
| Units | Standard |
| Fitment | Universal Fit |
| Warranty | 1 Year Limited Warranty |
Vehicle fitment
It is a universal fit gauge, so it is not built for one vehicle. Fit depends on the 2 1/16 inch mounting size and on the fuel system you connect it to.
Confirm the pressure range and sender type for your fuel system before wiring.
Installation notes
Electric fuel pressure gauges need a sending unit and wiring, so check that your sender matches the gauge before connecting power.
What’s included
Check the package contents against your installation before mounting the gauge.









