Overview
The Auto Meter Sport-Comp Mechanical Fuel Pressure Gauge, part number 3311, is a 2 1/16 inch mechanical gauge that reads fuel pressure from 0 to 15 psi. It is a universal fit part with a brushed aluminum Sport-Comp look.
Mechanical gauges like this one use a sealed bourdon tube and a full sweep. This gauge requires #4 braided hose, must be mounted outside the vehicle, and includes a mounting cup.
Key features
- Sealed bourdon tube for mechanical readings
- Full sweep design for accurate readings
- 0 – 15 psi range
- Brushed aluminum Sport-Comp look
- Mounting cup listed with the gauge
Hose routing and mounting
Braided hose carries pressure from the fuel line to the gauge, so routing it cleanly matters. Keep the run short, avoid sharp bends and secure it away from heat sources, moving linkage and sharp edges. Chafing at a clamp is one of the more common causes of leaks on older vehicles.
Mechanical gauges move with the pressure inside the hose, so a short, straight run usually gives the most stable needle. Check each fitting with the engine off before running it, and recheck after the first drive. A pressure gauge that reads high or low after installation often has a restriction or leak in the line.
- Route hose away from exhaust heat
- Use fittings matched to the line size you select
- Recheck every fitting after the first drive
Specifications
| Brand | Auto Meter |
|---|---|
| Part number | 3311 |
| UPC | 46074033117 |
| Gauge type | Fuel pressure |
| Gauge series | Sport Comp |
| Electric or mechanical | Mechanical |
| Gauge mounting size | 2 1/16 inches |
| Pressure range | 0 – 15 psi |
| Hose requirement | #4 braided hose |
| Mounting location | Outside vehicle |
| Illumination | White |
| Face color | Black |
| Units | Standard |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit gauge, so it is not built for a specific vehicle. Fit depends on a 2 1/16 inch mounting opening and a #4 braided hose line.
The gauge must be mounted outside the vehicle.
Installation notes
Plan for #4 braided hose to the gauge, since it is required. Fuel lines under pressure need a secure, leak-free connection before the engine is run.
What’s included
A mounting cup comes with the gauge. Not included: #4 braided hose, which the gauge requires.









