Overview
The Auto Meter Designer Black In Dash Electric Tachometer, part number 1478, is an electric tachometer for in-dash mounting in a 3 1/8 inch opening. It is a universal fit part and is not built for one specific vehicle.
The tachometer belongs to the Designer Black II series and has a black face with standard units. It has a domed lens and a black chrome bezel, and it comes with a 1 Year Limited Warranty from Auto Meter.
Key features
- Electric tachometer for engine speed readings
- Domed lens
- Black chrome bezel
- Black face with standard units
- 1 Year Limited Warranty from Auto Meter
Wiring and gauge placement
An electric tachometer reads engine speed from a signal, so its wiring matters as much as its mounting. Plan the power feed, ground and signal wire before fitting the gauge into the dash. A clean ground and a fused power source help prevent flicker and false readings, especially on older wiring.
Dash openings vary, and a universal fit gauge only works well when the cutout is correct and the bezel seats flush. Test-fit the gauge in the opening first, then confirm the needle sweep and backlight before final mounting. Keep the wiring slack behind the dash so the gauge can be pulled for service.
- Confirm the tachometer signal type your engine provides
- Use a fuse on the power wire
- Test the gauge before trimming the panel
Specifications
| Brand | Auto Meter |
|---|---|
| Part number | 1478 |
| UPC | 46074014789 |
| Gauge type | Tachometer |
| Electric or mechanical | Electric |
| Gauge mounting size | 3 1/8 inches |
| Gauge series | Designer Black II |
| Face color | Black |
| Units | Standard |
| Fitment | Universal Fit |
| Warranty | 1 Year Limited Warranty |
Vehicle fitment
It is a universal fit tachometer, not vehicle-specific. The main sizing check is the 3 1/8 inch gauge opening in your dash.
Measure the dash opening before ordering to confirm the 3 1/8 inch mounting size fits.
Installation notes
Electric tachometers need a power and signal connection from the engine, so have the wiring checked before the gauge is powered.









