Overview
The Auto Meter Pro-Comp Liquid-Filled Mechanical Boost Gauge, part number 5404, measures boost pressure on a 2 5/8 inch face. It monitors boost on gasoline, diesel and other engines, and it is a universal fit part.
The gauge uses an ultra-precise bourdon tube meter movement and a 1/8 inch NPT pressure connection. It needs no electrical hookup to operate, and it comes with 1/8 inch NPT fittings and a nylon line kit.
Key features
- Ultra-precise bourdon tube meter movement
- 1/8 inch NPT pressure connection
- No electrical hookup required
- Includes 1/8 inch NPT fittings and nylon line kit
- Pro-Comp series with white illumination and a black face
Choosing a boost source
A boost gauge is only as useful as the point it reads. Pick a boost source that reflects the pressure the engine actually sees, usually after the intercooler or at the intake manifold, and keep the line short and clean. Readings from a restricted or leaking source can mislead the driver.
Boost pressure is closely tied to the rest of the induction system. A leak in the intake tube, a loose clamp or a clogged filter can cause boost to fall, even when the turbo itself is healthy. Check the system for leaks after each change to the intake, and recheck the gauge when the engine is under load.
- Use a boost source away from heat
- Tighten clamps on intake tubing
- Check for leaks after any intake change
Specifications
| Brand | Auto Meter |
|---|---|
| Part number | 5404 |
| UPC | 46074054044 |
| Electric or mechanical | Mechanical |
| Gauge type | Boost |
| Gauge series | Pro-Comp |
| Gauge mounting size | 2 5/8 inches |
| Pressure connection | 1/8 inch NPT |
| Included | 1/8 inch NPT fittings and nylon line kit |
| Illumination | White |
| Face color | Black |
| Units | Standard |
| Fitment | Universal Fit |
Vehicle fitment
It is a universal fit gauge, so it is not built for one engine or vehicle. The connection depends on your engine’s boost source and a 1/8 inch NPT fitting.
Gasoline and diesel engines are both suitable uses for this gauge.
Installation notes
Connect the included nylon line to the 1/8 inch NPT pressure connection. No electrical wiring is needed. Boost lines carry pressurized intake air, so check every connection for leaks after installing.









