Overview
The Artec Industries Nighthawk front bumper with mid tube stinger, part number JL5303, is a mid-width powder coated steel front bumper for the 2018 Jeep Wrangler JL. It is made in the USA from CNC laser cut and formed 1/4-inch, 3/16-inch and 1/8-inch steel.
The winch plate is made from 1/4-inch thick formed steel for supreme rigidity, in Artec’s words. The stinger is 1.75-inch DOM tubing for strength, and a wiring access hole inside the stinger and bumper joint makes it easier to run wiring to mounted lights. The bumper is compatible with LED square style or OEM LED fog lights, and the light mounts are included.
Key features
- Mid-width bumper in powder coated steel
- Made in the USA from CNC laser cut and formed steel
- 1/4-inch thick formed steel winch plate for supreme rigidity
- Mid tube stinger from 1.75-inch DOM tubing
- Wiring access hole inside the stinger and bumper joint for mounting lights
- Compatible with LED square style or OEM LED fog lights
- Light mounts included
Choosing lights and recovery gear
A front bumper is often the first place people add lights and recovery points, so it helps to plan these before mounting anything. The light mounts included with this bumper suit square style LED or OEM LED fog lights. Pick the light size and beam pattern first, then check that the lights clear the grille, the hood and any winch. Bumper height and the angle of the mount set where the beam lands on the trail, so decide the aim at the start.
Recovery gear should be sized for the vehicle and the loads expected on the trail. Shackles, D-rings and straps are usually replaced as a set, and any gear should be inspected for cracks, bent pins and frayed webbing before each trip. A winch mounted to the winch plate should be used with a rated fairlead and a rope or cable matched to its capacity. Keep wiring out of the path of moving parts and check connections after rough trails.
- Use a fused relay for each light circuit
- Inspect D-rings and shackles before each trip
- Check bolt torque after the first trail outings
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | JL5303 |
| UPC | 816791028051 |
| Product | Nighthawk front bumper with mid tube stinger |
| Material | Steel, 1/4 in, 3/16 in and 1/8 in plate |
| Finish | Powder coat |
| Width | Mid |
| Stinger tubing | 1.75 in DOM |
| Winch plate | 1/4 in thick formed steel, included |
| Light mounts | Included |
| D-ring mount | Not included |
| Fit type | Direct fit |
| Origin | Made in the USA |
Vehicle fitment
The JL5303 is a direct fit for the 2018 Jeep Wrangler JL. It also fits 18-Current Wrangler JL models in 2-door and 4-door versions.
It is designed for the Wrangler JL and does not fit the JK Wrangler. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The wiring access hole at the stinger and bumper joint gives a route for light wiring. Use a fused relay for any lights.
What’s included
- Nighthawk mid-width front bumper with mid tube stinger
- Winch plate
- Light mounts
Not included: lights, D-rings and a winch.















