Overview
The ARB Twin Air Compressor Kit 12 Volt, part number CKMTA12, is a compact vehicle-mounted 12-volt twin air compressor with a 100% duty cycle and a 6.16 CFM output.
The compressor can air up a 35-inch tire in less than a minute, activate ARB Air Locking Differentials and run air tools. The kit includes the wiring and hardware to install it. It is a universal fit kit, not built for a specific vehicle.
Key features
- 12-volt twin compressor designed to be mounted on the vehicle
- 100% duty cycle
- 6.16 CFM output
- Can air up a 35-inch tire in less than a minute.
- Activates ARB Air Locking Differentials and runs air tools
- Includes full wiring harness, air locker solenoid terminals, OE-grade compressor isolating switch, mounting hardware and instructions
- 2-year warranty stated
Choosing a mounting spot
A 12-volt twin compressor works best where its intake stays clear of mud, dust and water splash. Look for a flat, well-ventilated spot that keeps the unit away from exhaust heat and moving suspension parts. Leave room for the wiring harness and the isolating switch so the cables are not pinched when the hood or tailgate closes.
Air lines should run with gentle bends and be supported at intervals so they do not rub against the frame or tow points. Fuse the power feed close to the battery. Test the locker and tire inflation circuits after mounting, then re-check the bolts after the first few trail runs.
- Keep the intake away from splash zones
- Support air lines so they do not chafe
- Leave access for the isolating switch
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | CKMTA12 |
| UPC | 700005757531 |
| Product type | Twin air compressor kit |
| Voltage | 12 volt |
| Duty cycle | 100% |
| Flow | 6.16 CFM |
| Tire inflation | 35-inch tire in less than a minute (ARB claim) |
| Warranty stated | 2-year |
| Fitment type listed | Universal fit |
Vehicle fitment
The compressor kit is not vehicle-specific. Plan a mounting location with room for the compressor, the wiring harness, the isolating switch and any air lines or locker connections.
This is a 12-volt unit; make sure your vehicle’s electrical system matches before installation. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Electrical accessories should be wired with correctly rated wire and a fuse or breaker near the power source, with connections sealed against moisture. Disconnect the battery before working on wiring. Tighten all fasteners snugly, then re-check them after the first miles of driving and again after off-road use. Follow local regulations for any lighting or equipment used on public roads.
What’s included
The kit includes a full wiring harness, air locker solenoid terminals, an OE-grade compressor isolating switch, mounting hardware and instructions.
Not included: Air hoses, fittings, air tools and ARB locking differentials are not in the kit contents. Compare the kit contents with your install plan before starting.












