Overview
ARB 60006: a gas-charged Nitrocharger Sport shock from the Old Man Emu 4WD range. It is a universal fit shock.
OME engineers developed the shock through a vehicle-specific program, and the valving was set in Australia.
The 60006 is a Nitrocharger Sport designed to work with OME springs, bushes and hardware. OME’s ride control engineers tested it on laboratory rigs and Outback roads, and it carries a 3 year, 60,000 km warranty.
Take the existing shock’s part number and mounting measurements with you when you buy, so the replacement can be matched before fitting.
Key features
- Gas-charged Nitrocharger Sport design
- Engineered for on-road drivability and off-road touring
- Valving set in Australia
- Designed to work with OME springs, bushes and hardware
Before you buy
Universal fit shocks depend on the vehicle they go on, so the match comes from mounting points and length rather than a model name. Measure the length and the stud or bracket positions of the shock you are replacing, then compare them with the new unit. This takes a few minutes and helps avoid a return.
Gas-charged designs hold damping more steadily when they heat up on long descents, which suits touring use. Pairing the shock with OME springs, bushes and hardware in the same setup keeps the suspension working as a system. If the old shock is leaking or has worn bushes, replace those parts at the same time.
- Measure the current shock’s length and mounting points
- Keep the original part number for reference
- Inspect bushes and brackets before installing
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | 60006 |
| UPC | 9312891030273 |
| Shock series | Nitrocharger Sport |
| Hydraulic or gas charged | Gas charged |
| Warranty | 3 years or 60,000 km |
| Country of manufacture | Australia |
Vehicle fitment
The 60006 is a universal fit shock. Measure your current shock’s mounting points before installing, and confirm fit for your vehicle’s year, model and trim.
The 60006 is a universal fit Nitrocharger Sport with valving set in Australia and compatibility with OME springs, bushes and hardware. Compare the shock’s length and mounting points with your existing unit before ordering.
What’s included
One shock absorber is supplied. Before starting, check the supplied parts against your installation.









