Overview
The ARB OMEFJC10LKBP51 is a BP-51 internal bypass shock absorber sold by ARB 4×4 Accessories. It fits the 2010–2014 Toyota FJ Cruiser (Base) and is a direct fit, gas charged unit with the same BP-51 design as the other FJ Cruiser units in the range.
Old Man Emu’s ride engineers developed the BP-51 in-house through a development process that ARB describes as exhaustive. The shocks are vehicle specific, reuse the existing mounting points, and are meant to give comfort and control in the same unit.
Rebound and compression are both adjustable on the vehicle. ARB explains that most adjustable shocks only adjust compression, so this two-way adjustment lets the ride be tuned more closely to the vehicle and the trip.
Components are 6061 grade aluminum: the remote oil canister, spring seat, adjuster and top hat. The body is 51mm bore with a type III hard anodized finish. Dash -6 high temperature Teflon hose and large Teflon lined spherical bearings are fitted, along with oversized rubber bushings. The piston shaft is hard chromed and ground and has an impact resistant high density polyethylene shaft guard. Part number OMEFJC10LKBP51 and UPC 9332018039651 identify this unit for the FJ Cruiser, and the adjustable design is the feature that sets it apart in the range. It is labeled direct fit.
Key features
- Internal bypass design
- Independent rebound and compression adjustment
- 6061 grade aluminum remote oil canister and spring seat
- Quality oversized rubber bushings
- Hard chromed, ground piston shaft
- 51mm bore with a type III hard anodized body
Tuning a two-way adjustable shock
Rebound controls how quickly the shock extends after a compression, while compression controls how quickly it compresses under load. Two-way adjustment lets you set these separately, which helps when the vehicle is carrying different loads or moving between smooth pavement and rough trails. Change one setting at a time and note the result, so the effect of each change is clear.
Adjustable shocks rely on clean, tight adjusters and intact seals. After rough use, check the adjuster knobs for movement and wipe down the body. If the ride changes without any adjustment, inspect the shock for seepage and worn bushings before changing settings again.
- Adjust one setting at a time
- Test the change on a familiar road
- Inspect adjusters and seals after rough use
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | OMEFJC10LKBP51 |
| UPC | 9332018039651 |
| Bore | 51mm |
| Shock type | Gas charged |
| Fitment type | Direct fit |
Vehicle fitment
Only the 2010–2014 Toyota FJ Cruiser (Base) is covered. Other FJ Cruiser years and Toyota models are outside this fit.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package contents against your installation before starting.









