Overview
The Fabtech FTS1129 is a polyurethane shock bushing, part number FTS1129, for shock absorber mounts. It is a universal fit part, so it does not target a single vehicle. Check the bushing against your shock and mount before installing it.
Key features
- Polyurethane construction
- Universal fit design
Choosing a replacement bushing
Shock bushings sit where the shock eye meets its mount and absorb small movements as the suspension cycles. Over time the material can harden, crack or flatten, which lets the shock rattle or wander at the mount. A worn bushing is often easiest to spot by inspecting the eye for cracks, looseness or uneven wear when the vehicle is raised and the suspension is unloaded.
When choosing a replacement, measure the existing bushing’s inside diameter, outside diameter and width before ordering. Shock mounts vary in design, so the bushing should match both the shock eye and the bracket it sits in. Polyurethane resists wear well but is firmer than rubber, which can transmit more road noise into the cab. Replace bushings in pairs on the same axle so both sides behave the same way.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS1129 |
| UPC | 674866023062 |
| Type | Shock bushing |
| Material | Polyurethane |
Vehicle fitment
It is a universal fit bushing, so compare its dimensions with your existing shock mount before installing it.
Confirm your vehicle’s year, model and trim before ordering.









