Overview
The ARB Rear Panhard Rod PANR008 is an adjustable rear panhard rod, also called a Panhard bar, for the 1991–1997 Toyota Land Cruiser (Base) and the 1996–1997 Lexus LX450 (Base), per the manufacturer fitment list. It is made to fit both right-hand drive (RHD) and left-hand drive (LHD) vehicles.
ARB’s Old Man Emu range recommends this type of rod for raised vehicles, where it resets axle location and geometry. The rod uses high strength 4140 alloy steel with a hard wearing black powder coat, plus premium bushings for performance and extended life.
Key features
- Adjustable length for axle centering
- Works with RHD and LHD vehicles
- High strength 4140 alloy steel body
- Black powder coat finish
- Premium bushing technology
Rear axle location basics
A rear panhard rod keeps the rear axle from shifting side to side under load, which is especially helpful on vehicles with a raised suspension. Because the rod sets axle position, even a small change in length shifts the wheels and can change how the vehicle tracks. Setting the centering with the vehicle at ride height gives the most consistent result.
Right-hand drive and left-hand drive vehicles place the driver differently, so check that the rod’s position clears the body and the exhaust on your build. Look at the rod ends and bushings for play, and inspect the mounting points on the axle and frame after rough trails. Tire wear on one edge is often the first sign that the rear axle needs re-centering.
- Confirm clearance to the exhaust and body
- Check bushings for cracks after rough trails
- Watch for uneven rear tire wear
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | PANR008 |
| UPC | 9332018019158 |
| Position | Rear |
| Type | Adjustable panhard rod |
| Drive side | RHD and LHD |
| Material | High strength 4140 alloy steel |
| Finish | Black powder coat |
| Bushings | Premium bushing technology |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list includes the 1996–1997 Lexus LX450 (Base) and the 1991–1997 Toyota Land Cruiser (Base).
The list covers only the Base trim for those two models and years. Other years and trims are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Adjust the rod length to center the axle, then check alignment at ride height. Because rod geometry sets axle position, recheck the setting after fitting.
What’s included
Check the mounting hardware against your installation before starting. The rod is made from 4140 alloy steel with a black powder coat and premium bushings.









