Overview
The ARB Front Panhard Rod PAN3050 is an adjustable front panhard rod for the 1990–2007 Toyota Land Cruiser Base. It is built for left-hand drive (LHD) vehicles only.
Old Man Emu, the ARB line behind this rod, recommends adjustable panhard rods for raised vehicles that need to reset axle location and geometry. This one uses high strength 4140 alloy steel, a black powder coat and premium bushing technology for longer life.
Key features
- Adjustable length to center the front axle
- Left-hand drive (LHD) only
- High strength 4140 alloy steel construction
- Black powder coat finish
- Premium bushing technology
- Direct fit per the manufacturer fitment list
Left-hand drive considerations
Left-hand drive vehicles place the driver on the left side, and the fitment for this rod reflects that layout. A rod built for left-hand drive will not suit a right-hand drive vehicle because the mounting positions are reversed. Before buying any panhard rod, confirm the drive side along with the year, model and trim of the vehicle.
Once fitted, the adjustable length lets you center the front axle, and that setting should be checked after lifts, tire changes and major suspension work. The bushings and mounting hardware carry side loads, so inspect them regularly. A rod that is off-center can make the vehicle steer or track unevenly on the road.
- Confirm drive side before ordering
- Re-center after changing suspension height
- Inspect bushings and hardware at regular service
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | PAN3050 |
| UPC | 933201801919 |
| Position | Front |
| Type | Adjustable panhard rod |
| Drive side | Left-hand drive (LHD) only |
| Material | High strength 4140 alloy steel |
| Finish | Black powder coat |
| Bushings | Premium bushing technology |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list covers the Toyota Land Cruiser (Base) from 1990 through 2007.
Other Land Cruiser trims and years outside 1990–2007 are not covered, and right-hand drive vehicles are not covered because the rod is LHD only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A panhard rod locates the axle side to side. After fitting, adjust the length to center the axle and check alignment at ride height.
What’s included
Included with the rod are its bushings and black powder coat finish. Verify the mounting hardware against your setup before fitting.








