Overview
The ARB BP5160011R is a rear right bypass shock with a remote reservoir from ARB 4×4 Accessories, part of Old Man Emu’s BP-51 high performance range. It is a direct fit for the 2005–2016 Toyota Tacoma.
Old Man Emu ride engineers designed, developed and tested the BP-51 shocks, and each one is vehicle specific. The rear shock uses the truck’s existing mounting locations, so it installs without extra vehicle modification. Rebound and compression can be adjusted while the shock stays on the vehicle.
The shock body, reservoir and components are hard anodized aircraft-grade 6061 T6 aluminum, and the reservoir holds high pressure nitrogen behind an aluminum floating piston. The shaft is 19mm, hard chromed and ground, with a replaceable impact-resistant shaft guard. Dash 6 high temperature Teflon hose with high flow fittings connects the remote reservoir, and large Teflon-lined spherical bearings are used on the coilover applications. Each shock is adjustable.
Key features
- Bypass technology with a remote reservoir
- Independently adjustable rebound and compression on the vehicle
- Hard anodized, aircraft-grade 6061 T6 aluminum body, reservoir and components
- Adjustable spring preload and ride height
- High pressure nitrogen reservoir with an anodized aluminum floating piston
- 19mm hard chromed ground shaft with a replaceable impact-resistant shaft guard
- Dash 6 high temperature Teflon hose with high flow fittings
- Large Teflon-lined spherical bearings on the coilover applications
Remote reservoir shock upkeep
A remote reservoir shock keeps the gas and oil away from the damper body, which helps it cope with heat during long descents. Because the reservoir sits apart from the shock, hose routing and clearance matter more than on a standard unit. Route the hose so it cannot rub on the frame, axle or wheel, and check that the reservoir can move freely through full suspension travel.
Routine checks are simple: wipe the shaft clean after muddy runs, inspect the shaft guard for impact damage, and look at the bushings and hardware for wear. A shock that leaks, feels loose or makes a knocking sound at the mounts should be inspected before the next trip. Adjust rebound and compression in small steps and note the settings you prefer.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | BP5160011R |
| UPC | 9332018041388 |
| Position | Rear right only |
| Shaft | 19mm hard chromed, ground |
| Body material | 6061 T6 aircraft-grade aluminum |
| Lift height | w/0 in. lift/drop |
| Fitment type | Direct fit |
Vehicle fitment
The BP5160011R fits the 2005–2016 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner versions. Other Toyota models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is the rear right side only, so the rear left is a separate part number. Each shock is vehicle specific, so confirm the side and position before ordering.
What’s included
Check the package contents against your installation before starting.





