Select your vehicle

ARB Old Man Emu Coil Spring – 2619

ARB 4x4 Accessories

Shop Jeep Wrangler JK Coil Springs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Heavy load coil spring, part number 2619, sold as a pair
  • Fits the 2013 Jeep Wrangler (JK)
  • Used with a 2.8L diesel engine

Description

Overview

The ARB Old Man Emu coil spring 2619 is a heavy load coil spring from ARB 4×4 Accessories, sold as a pair. It fits the 2013 Jeep Wrangler (JK), and it is a direct fit.

Old Man Emu tailors its coil springs to each vehicle make and model and to the load the vehicle carries. The 2619 is designed for ideal handling and control under load, with lift height as a side effect.

Key features

  • Heavy load rating
  • Sold as a pair
  • Used with the 2.8L diesel engine
  • Designed for handling and control under load

Keeping JK springs in service

Coil springs on a Wrangler JK carry the weight of the body, the drivetrain and the payload, so their condition matters for steering and braking. A spring that has sagged or cracked changes how the front end responds and can make the vehicle wander on the road.

When a diesel engine is in the vehicle, the extra weight over the front axle adds load to the springs and shocks. Inspect the springs for cracks near the seat, check the lower spring pads for rust, and look at the shocks for leaks at the seals. Tighten the upper and lower mounting hardware after the first few drives.

  • Look for cracks near the spring seats
  • Inspect lower spring pads for rust
  • Check shocks for oil leaks at the seals

Specifications

Brand ARB 4×4 Accessories
Part number 2619
UPC 70000545444
Load rating Heavy load
Engine listed 2.8L diesel
Quantity Sold as a pair
Fitment type Direct fit

Vehicle fitment

It fits the 2013 Jeep Wrangler (JK). Other Wrangler years and other models are outside this fit.

The fitment entry names a single model year, 2013, so confirm the year on your vehicle before ordering. Sold as a pair means two springs come in each order.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

The spring is sold as a pair.

SKU: ARB2619 Category:

Specification

Shipping weight 24.00 lbs
Package dimensions 24.00 × 15.00 × 8.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2013Rubicon, Sahara, Sport, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the ARB 2619 fit a 2013 Jeep Wrangler JK?

Yes. It fits the 2013 Jeep Wrangler (JK), and the spring is a direct fit. Other Wrangler years are outside that fit.

Is the ARB 2619 for a diesel engine?

Yes, it is for the 2.8L diesel engine. It is sold as a pair, with part number 2619 and UPC 70000545444.

Is the ARB 2619 sold as a pair?

Yes. It is sold as a pair. It is a heavy load coil spring from ARB 4x4 Accessories, designed for handling and control under load.

How often should I inspect coil springs on a Wrangler?

Check them whenever you change tires or service the brakes, and after rough trail runs. Look for sag, cracks and rust at the seats. Any spring showing damage should be replaced rather than repaired.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Coil Springs on Amazon