Overview
The ARB Intensity LED Flood Light, part number AR32F, is a 32 LED flood driving light from ARB 4×4 Accessories with a 20 degree full width flood beam. It is universal fit and sold as a single light, with a clear lens and stem mounting.
The body is high pressure cast A360 aluminum, with a UV stable polycarbonate lens and a stainless steel mount with multiple positions. It carries IP68 sealing, Deutsch DT-06 waterproof connectors and vibration certification to MIL810-STDG.
The output is 8200 raw lumens at 90 watts, with a 6500 Kelvin color temperature. At 10 m (33 ft), the flood beam measures 770 lux and the spot beam 2250 lux.
Key features
- 20 degree full width flood beam
- 32 LEDs, 8200 raw lumens, 90 watts
- IP68 sealing with Deutsch DT-06 waterproof connectors
- Over and under voltage protection
- 50,000+ hour LED life span
- Integrated thermal management and RFI/EMC protection
- Made in the USA.
Wiring and mounting considerations
A high output flood light draws a lot of current, so the wiring matters as much as the light. A fused relay keeps the switch circuit light and protects the vehicle’s electrical system. Use wire sized for the load, keep connections clean and sealed, and route the harness away from moving parts and heat.
Mounting position decides how well the beam covers the trail. Aim the light so the flood pattern lights the ground ahead, then tighten the stainless steel mount once the angle is set. Vibration from rough terrain can loosen an aim over time, so check the mount after the first few outings.
Where the light sits on a vehicle also affects road legality, so check local rules before driving with it lit on public roads. Covering the lens when not in use helps keep it clean.
- Use a fused relay for the switch circuit
- Check connector seals during routine inspection
- Clean the lens regularly for full output
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | AR32F |
| UPC | 700006489141 |
| Product type | Flood light |
| Light source | 32 LEDs |
| Output | 8200 raw lumens |
| Power | 90 Watts |
| Input voltage | 10-36 V DC |
| Amp draw | 6.25A at 14.4V |
| Color temperature | 6500 Kelvin |
| Flood beam | 20 degree full width |
| Spot beam (listed) | 10 degree full width |
| Lux at 10 m (33 ft) | 2250 (spot), 770 (flood) |
| Body | High pressure cast A360 aluminum |
| Lens | UV stable polycarbonate, clear |
| Mount | Stainless steel, multiple position, stem |
| Finish | UV stable polyester powdercoat |
| Breather | Gore-Tex |
| Operating temperature | -40 °F to +145 °F |
| LED life span | 50,000+ hours |
| Weight, complete | 3.1 kg / 6.8 lb |
| Size (listed) | 0 to 10 inches |
| Fitment | Universal fit |
Vehicle fitment
It is universal fit, so no vehicle is named for this flood light. Check that your vehicle has a suitable mounting position and a 10-36 V DC supply before fitting.
No vehicle is named for the AR32F, so your mounting space and power supply decide suitability. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Route power through a fused relay, and check local road-use rules for driving lights before using the light on public roads. Disconnect the battery before connecting the harness.
What’s included
Sold as a single light. Check the package contents for a harness and mounting hardware before starting the installation.



















