Overview
The Luminix High Power LED Fog Lamps, part number 12003 from Putco, are LED fog lamps and headlight units supplied ready to mount. High power LEDs provide bright light from an assembly that is already built.
Because each unit is supplied fully assembled, fitting is a mounting job rather than assembly. Fitment is universal fit, so no vehicle is named. The UPC is 10536120035.
Key features
- Supplied fully assembled
- Ready to mount
- High power LED light
- Fog lamp and headlight use described
- Universal fit
Wiring a fog lamp safely
A fully built lamp reduces the assembly work, but the wiring still decides how reliable the installation will be. Start by choosing a fused power source that matches the lamp’s draw and runs directly from the battery through a relay where possible. Avoid tapping into low-current circuits such as dash illumination, since they can flicker or fail under load. Lay the wire route before drilling, keeping it away from exhaust heat and sharp body edges.
Secure the harness with clips so it cannot rub against the bumper, and use weatherproof connectors at every joint exposed to road spray. Confirm the ground point is clean bare metal and tighten it firmly, since a poor ground causes dim output and heat. After installation, switch the lamps on with the engine running and check for steady light. Recheck the mounts after the first longer drive, when vibration has had time to settle the hardware.
Specifications
| Brand | Putco |
|---|---|
| Part number | 12003 |
| UPC | 10536120035 |
| Light type | Fog lamp |
| Bulb type | LED |
| Assembly | Fully assembled |
| Fitment | Universal fit |
Vehicle fitment
This lamp is not vehicle-specific and carries universal fit. Confirm that the mounting position on your vehicle leaves room for the assembly.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount and wire the unit as one assembly. Add a fuse in the power feed and confirm local rules for fog lamps before use on public roads.
What’s included
The unit arrives fully built. Plan the hardware and wiring you need before starting.









