Overview
The Rugged Ridge LED Light Bar Kit, part number 11232.41, is a windshield lighting package for the Jeep Wrangler JK. It bundles a windshield light bar, three 13.5-inch LED light bars, amber light covers and a wiring harness. It fits 2007 to 2018 Jeep Wrangler (JK) models, including Rubicon, Sahara, Sport, Unlimited and X trims.
The windshield bar is built from 2-inch OD steel tube, with brackets that mount directly to the JK windshield hinge locations for a straightforward installation. Each of the three LED light bars emits over 6,000 lumens. Three pairs of rectangular amber light covers and a light harness are included to wire the lights to the vehicle.
Key features
- Windshield light bar bundled with three LED light bars
- 2-inch OD steel tube construction
- Brackets that mount to the JK windshield hinge locations
- Three 13.5-inch LED light bars, each over 6,000 lumens
- Three pairs of rectangular amber light covers
- Light harness for wiring
- It is a direct fit for 2007 to 2018 Jeep Wrangler JK models.
Choosing windshield lighting
A windshield-mounted light bar sits higher and farther forward than most auxiliary lights, which affects both trail visibility and glare on the road. Before buying a setup like this, think about how much of the kit you will use. Some owners run only the windshield bar for trail driving, while others add the side lights for wider coverage at slow speeds.
Mounting points on the windshield frame carry the load of the bar, so inspect the brackets and fasteners after the first few trail runs and again at each oil change. Loose hardware or cracked mounting tabs are the usual early signs of wear. Keep the wiring harness clear of the wiper arms and hinge movement, and route it along existing factory looms where possible.
- Check bracket bolts for tightness after rough trails
- Inspect lens covers for cracks or moisture inside
- Use a fused relay so the switched load stays off factory wiring
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11232.41 |
| UPC | 804314294816 |
| Lens color | Clear |
| Bulb type | LED |
| Windshield bar tube | 2-inch OD steel |
| Windshield bar part number | 11232.25 |
| LED light bars | Three 13.5-inch (part 15209.11) |
| Light output | Over 6,000 lumens each |
| Light covers | Three pairs, rectangular amber (part 15210.45) |
| Light harness | Part 15210.73 |
| Mounting type | Bracket |
| Fitment | Direct fit |
Vehicle fitment
The kit covers 2007 to 2018 Jeep Wrangler (JK) models with trims including Rubicon, Sahara, Sport, Sport S, 70th and 75th Anniversary, Unlimited variants and X.
Earlier Wrangler generations such as TJ, LJ and YJ are not on this list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The brackets mount directly to the JK windshield hinge locations, and the light harness wires the three light bars. Use fused relay wiring, and check local road-use rules for auxiliary lights before driving with them on public roads.
What’s included
Windshield light bar (11232.25), three 13.5-inch LED light bars (15209.11), three pairs of rectangular amber light covers (15210.45) and a light harness (15210.73).
Not included: Relay and switch are not part of this kit, so plan to source them separately.














