Overview
The ARB Intensity 40 Inch LED Light Bar, part AR40CARM761, is a driving light for bull bar or roof rack mounts. It is universal fit, so no single vehicle model applies.
The heat sink and mounting system were designed together, which improves stability and driving vision over typical light bar mounts. Behind a polycarbonate lens, two rows of 20 individual LEDs use the patented lens and reflector design found in current ARB Intensity LEDs.
Key features
- Heat sink and mount designed together
- Two rows of 20 individual LEDs
- Lens and reflector technology carried over from ARB Intensity LEDs
- Polycarbonate lens
- Bull bar or roof rack mounting
Matching the bar to your mount
A light bar is only as steady as the mount under it. Before fixing a 40 inch bar, look at the bull bar or roof rack for flex, rust and loose welds, and check that its bolt pattern and clamp points suit the bar’s bracket. A solid mount keeps the beam aimed where you set it on rough tracks.
Think about where the bar will sit relative to other gear. Leave room for the lens to be cleaned, the wiring to bend without strain, and the bar to be removed for servicing. Many owners pair a bar with a dedicated switch and relay, and check local road-use rules for auxiliary lighting before fitting it to a road vehicle. Re-check fixings after the first few trail runs, since new mounts settle.
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | AR40CARM761 |
| UPC | 9332018046260 |
| Size | 40 inch |
| Light source | LED, two rows of 20 individual LEDs |
| Lens | Polycarbonate |
| Mounting | Bull bar or roof rack |
Vehicle fitment
Universal Fit: the bar is not vehicle-specific. A bull bar or roof rack is needed for the mount, and placement depends on your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Route the wiring before fixing the bar in place, and use a fuse and relay on the power feed. Road-use rules for driving lights differ by region, so check them first.
What’s included
Compare the parts on arrival with your mounting plan.
Not included: a bull bar or roof rack, plus any wiring you need for the install.







