Overview
The Vision X Lighting 4007314 is a 2 inch Solstice Narrow Beam Solo LED pod, a single-unit off-road light built on a 10 watt LED that produces 900 lumens. It is universal fit, so it installs through whichever bracket or channel hardware you pick.
The Solo s1100 sits in the Solstice Series with a compact square housing measuring roughly 2 inches on each side. A channel on every face lets several units or mounts combine into custom layouts. It is a modular light, and the Solstice Series carries a lifetime warranty.
Key features
- 10 watt LED technology, producing 900 lumens in a 2 inch by 2 inch square housing.
- Channel on all four sides to link with other Solstice Solo pods or with flat, tube or helmet mounting hardware.
- Die-cast aluminum housing that Vision X says offers durability and heat dissipation.
- IP68 rating: impenetrable to dust and submersible up to 3 meters of water.
- Polycarbonate lenses sit in a 6061 aluminum face plate that acts as a heat sink to help clear snow and ice.
- Advanced electronic drivers with a rated 50,000 hour life span.
- Variable 9 – 50 Volt DC input with a 0.83 amp draw.
- Tested to 15.6Grms of vibration for high-impact use.
Narrow beam use cases
A narrow beam pod concentrates its output into a tighter pattern, which suits long sightlines on open trails, fire roads and desert running. It reaches farther down the path than a wide flood, but it lights less of the area beside the vehicle, so pairing it with a wider light on the same mount often gives better overall coverage on technical terrain.
Before you buy, think about how many pods you want and where they will mount. Each pod’s channels allow stacking into a bar or a cluster, and cluster layouts spread the load on the mounting hardware. Check that the bracket can carry the weight of every unit, and that the wiring runs from the switch to each pod without stress on the connectors.
- Match the pattern to your main driving, trail or highway
- Keep lenses clean for full output
- Inspect seals after rough trips
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 4007314 |
| UPC | 837544007314 |
| Model | Solo s1100, Solstice Series |
| Beam pattern | Narrow beam (from product title) |
| Housing size | 2 inch x 2 inch square |
| LED | 10 watt |
| Luminous output | 900 lumens per pod |
| Voltage input | 9 – 50 Volt DC, variable |
| Current | 0.83 amps |
| Life span | 50,000 hours |
| Protection | IP68, submersible up to 3 meters |
| Housing | Die-cast aluminum |
| Lens | Polycarbonate, described by the maker as unbreakable |
| Face plate | 6061 aluminum |
| Vibration rating | 15.6Grms |
| Fitment | Universal fit |
Vehicle fitment
No specific vehicle is named for this narrow beam pod. Vision X marks it universal fit, which means the mounting bracket you choose determines where it goes on a vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Map out the pod layout before drilling or clamping, since each channel accepts other Solstice Solo pods or the hardware Vision X offers. Run power through a fused relay and check your local rules for driving lights before using the pod on public roads.
What’s included
Check the package contents against your installation before starting, since mounting hardware for flat, tube or helmet mounts may need to be sourced separately.
Not included: Plan to supply a relay, wiring and mounting bracket separately.












