Overview
The Rigid Industries SR-Q Series Flood LED Light, part number 904123, is a compact wide-configuration LED light for off-road, agricultural and general driving use. It is a universal fit light, so the mounting location and the space around it decide where it works. Its small body suits tight spots where a larger light will not fit.
The SR-Q uses the same LED technology as Rigid’s D-Series, but in a wide configuration instead of a square one. The cast aluminum housing forms the body, and the polycarbonate lens is sealed against the weather. The clear lens and 0 to 10 inch size range suit auxiliary lighting on many kinds of equipment.
Key features
- LED light source behind a clear polycarbonate lens
- Cast aluminum housing for a solid, compact body
- Wide configuration using the same LED technology as Rigid’s D-Series
- Housing and lens sealed against the elements for durable outdoor use
- Universal mounting type with a 0 to 10 inch size range
- Compact enough to fit into tight spots where a larger light will not
Mounting and wiring considerations
A compact flood light fits into tight spots, but the mounting surface still sets its aim and vibration exposure. Choose a flat, solid location, and use a bracket that holds the light without flexing. Measure the clearance behind the lens before drilling, since the body needs room for the wiring to bend without strain.
Polycarbonate lenses handle impacts well but scratch easily, so use a soft cloth and mild cleaner rather than abrasive pads. Seal connectors with a waterproof boot or dielectric grease, and route leads away from heat sources and sharp edges. Recheck the mounting bolts after the first few uses on rough ground, since vibration can loosen them.
- Measure clearance behind the lens
- Seal every connector against moisture
- Use a soft cloth on polycarbonate lenses
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 904123 |
| UPC | 849774017728 |
| Light type | LED flood light, wide configuration |
| Bulb type | LED |
| Lens color | Clear |
| Lens material | Polycarbonate |
| Housing material | Cast aluminum |
| Mounting type | Universal |
| Size | 0 to 10 inches |
| Fitment | Universal fit |
| Units | Single light |
Vehicle fitment
This is a universal fit light and is not vehicle-specific, so no year, model or trim list applies. Where it works depends on the mounting location you pick and the clearance behind the lens. Measure the 0 to 10 inch size range against that spot before you install it.
Installation notes
LED driving lights of this type are usually wired through a fuse and a relay, which keeps the current load off the switch and the factory wiring. Route the leads away from moving parts and seal the connections against moisture. Check local rules for auxiliary driving and fog lights before using them on public roads, since the rules vary by region.
What’s included
The package contains one SR-Q Series Flood LED Light.
Not included: Wiring harness, switch and mounting hardware are not included, so plan to source them before installing.









