Overview
The Fab Fours FFIJL18-D4652-1 is a matte black steel second-generation Vengeance front bumper with a pre-runner guard. It is made for the 2018–2022 Jeep Wrangler JL and the 2020–2022 Jeep Gladiator JT.
The bumper has a center cutout for a 20-inch LED light bar and mounting options on each side for two 3-inch LEDs. The fit is high and tight, with lower cutouts for airflow, and the bumper is full width. It is not winch mount compatible, and D-ring mounts are not included.
The second-generation design is made for the Jeep JL and Gladiator JT, and the pre-runner guard is the only guard option. The 20-inch light bar in the center cutout is the main light location, while the side mounts take smaller 3-inch LEDs.
This design comes only with the pre-runner guard. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Center cutout for a 20-inch LED light bar
- Side mounting options for two 3-inch LEDs
- Light mounts included
- High, tight fit with lower cutouts for airflow
- Pre-runner guard version
Recovery and mounting limits
A front bumper with a pre-runner guard is built for protection, not for pulling. Recovery loads belong on mounts designed for them, and a bumper that is not winch mount compatible should not be used as an anchor. Check the frame, recovery points and any D-ring mounts you add before the first recovery.
Light placement also matters on the JL and JT. The center light bar sits in the most protected position, while the side mounts are exposed to brush. Route cable through the existing openings, use a fused relay, and check beam aim after the first few trail runs.
- Use recovery points rated for the load
- Do not anchor a winch to a non-compatible bumper
- Re-check light aim after trail use
Specifications
| Brand | Fab Fours |
|---|---|
| Part number | FFIJL18-D4652-1 |
| Finish | Matte black |
| Material | Steel |
| Width | Full |
| Position | Front |
| Winch mount | Not compatible |
| Guard | Pre-runner guard |
| Light mounts | Included |
| D-ring mounts | Not included |
| Fitment | 2018–2022 Jeep Wrangler JL and 2020–2022 Jeep Gladiator JT |
Vehicle fitment
It fits the 2020–2022 Jeep Gladiator JT and the 2018–2022 Jeep Wrangler JL, in two-door and four-door Wrangler bodies.
The list does not include the Wrangler JK or earlier generations. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Second-generation Vengeance front bumper with pre-runner guard and light mounts.
Not included: D-ring mounts are not included. The light bar and the LEDs are not included.
