Overview
The ARB TRED Pro Mount Extension Pins, part number ARBTPMKEP, are extension pins from ARB 4×4 Accessories for the TRED Pro mount. TRED Pro is a recovery device for getting a four-wheel drive, ATV or equipment out of trouble when traction is lost in sand, mud, sludge, slime or snow.
Key features
- Extension pins for the TRED Pro mount
- Part number ARBTPMKEP
- Labeled Universal Fit by ARB
- TRED Pro is designed for use in sand, mud, sludge, slime and snow.
Mount accessories and care
Mount extension pins add reach or positioning to a recovery device mount, so they carry load through the same connection points as the device. Before using any pin, check that it seats fully and that the retaining method holds it in place. A pin that sits loosely can change how a recovery device pulls, which is why fit should be checked on the ground before a trip rather than on the trail.
Recovery devices used in sand, mud, sludge and snow collect grit and moisture. Wash the mount area after use, dry the pins, and check for corrosion or bent metal. Grease moving parts lightly if the design calls for it. Replace any pin that is bent, cracked or hard to seat, because a worn pin can slip under load and fail the connection. Keep spare retaining hardware in your kit so a missing clip does not stop the recovery.
- Check the pin seats fully before each trip
- Wash grit off the mount after sandy or muddy use
- Inspect for bends, cracks or corrosion
- Carry spare retaining clips in the recovery kit
Specifications
| Brand | ARB 4×4 Accessories |
|---|---|
| Part number | ARBTPMKEP |
| Fitment | Universal Fit |
Vehicle fitment
Universal Fit applies, so these pins are not tied to a make, model or year. Check fit against your vehicle’s year, model and trim, and match the pins to your TRED Pro mount before installing.









