Overview
The Alloy USA 1301 is a wheel lug stud with a 1/2 in. x 20 thread and a .609 knurl diameter, packaged in a pack of 5 pieces. It is a universal fit stud, so match it to your hub by thread and length.
Lug studs and hub seating
A wheel stud is pressed or threaded into the hub and carries the clamping load that holds the wheel on. The knurled section grips the hub bore so the stud stays put while the nut is tightened, which is why a stud that spins needs replacing. Thread condition matters as much as length, since damaged threads can strip under torque.
When installing, start each nut by hand to avoid cross-threading and tighten in a star pattern so the wheel seats evenly. Check the threads on the stud and the nut before reuse, and clean any rust from the hub face. Recheck the nut torque after a short drive, since new studs can settle slightly.
- Check the knurled section for damage
- Start nuts by hand
- Tighten in a star pattern
- Replace a stud that spins in the hub
Specifications
| Brand | Alloy USA |
|---|---|
| Part number | 1301 |
| UPC | 804314180317 |
| Thread size | 1/2 in. x 20 |
| Knurl diameter | .609 |
| Quantity | 5 pieces |
| Fitment label | Universal Fit |
Vehicle fitment
No vehicle is named for this stud. Universal Fit is a label rather than a vehicle, so compare the thread and stud length with the stud you are replacing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Five wheel lug studs are included. Lug nuts are not included, so have them on hand before installing.









