Overview
The AirLift LoadLifter 5000 Ultimate Air Spring Kit, part number 88347, is a rear air spring kit with an internal jounce bumper for load leveling. The kit can be run with zero air pressure.
The kit is a set of replacement air sleeves.
Key features
- Internal jounce bumper inside the air spring
- Adjustable air pressure
- Can be run with zero air pressure
- Listed installation time of 2 hours
Installing a rear air spring kit
Rear air springs carry load between the axle and the frame, so their condition affects both ride height and handling. The internal jounce bumper inside the spring cushions the suspension when it compresses fully, which reduces harsh contact on rough roads. Before installing, support the vehicle safely and check that the air lines, valves and mounting points are in good condition.
Adjustable air pressure lets you tune the springs to the load you carry, but it does not replace proper suspension checks. Run the system with the vehicle unloaded first to confirm each spring holds its height and that no air leaks at the fittings. Recheck the bolts after the first few trips.
- Clean the mounting surfaces before fitting
- Route air lines away from heat and moving parts
- Keep the compressor and tank accessible for service
- Confirm the air system holds pressure overnight
Specifications
| Brand | AirLift |
|---|---|
| Part number | 88347 |
| UPC | 729199883477 |
| Position | Rear |
| Features | Adjustable, with internal jounce bumper |
| Installation time | 2 hours |
Vehicle fitment
Fit depends on your exact vehicle, so confirm the year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the kit contents against your installation before starting.









