Overview
The AirLift 57275 LoadLifter 5000 is a rear leaf spring leveling kit built around air springs that hold the rear of a vehicle level under load. AirLift rates it for up to 5000 lbs. of leveling capacity, and the air pressure adjusts from 5 to 100 psi so the ride height can be matched to the weight being carried.
The kit suits owners who tow trailers or haul heavy loads and need the rear end to sit level. The kit is a no drill option, and AirLift points to vehicle-specific illustrated installation manuals for each application.
Key features
- Levels up to 5000 lbs. of rear load
- Two-ply fabric reinforced air springs
- Air pressure adjustable from 5 to 100 psi
- Quick connect polymer air fittings that are easy to use
- Reinforced air bellows for lasting strength
- Vehicle-specific illustrated installation manuals
- Limited lifetime warranty
Towing and hauling with leveling
Leveling the rear helps headlight aim, steering response and tire wear when a heavy load pushes the back down. Air springs make that adjustment with pressure instead of added leaves, so the setting can change between an empty truck and a loaded one. Check the rear height each time the load changes.
Good habits extend the life of the system. Keep the bellows clean and free of grit, avoid driving over curbs with the springs fully inflated, and store extra fittings in a dry place. Before a long tow, verify pressure at both sides so the rear sits evenly.
- Set pressure with the load in place
- Check both sides for even height
- Keep bellows clear of debris and road salt
Specifications
| Brand | AirLift |
|---|---|
| Part number | 57275 |
| UPC | 729199572753 |
| Leveling capacity | Up to 5000 lbs. |
| Air pressure range | 5 to 100 psi |
| Air spring construction | 2-ply fabric reinforced |
| Fittings | Quick connect polymer |
| Position | Rear |
| System type | Air bag |
| Warranty | Limited lifetime |
Vehicle fitment
Vehicle years, models and trims are not established for this kit. Verify your year, model and trim against the kit before buying.
Because the manuals are vehicle-specific, a rear leaf spring kit for one model may not match another. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes 2 hours or less. Support the vehicle on stands before working beneath the rear axle, and follow the illustrated steps for your application.
What’s included
Check the package contents against your installation before starting.














