Overview
The AirLift LoadLifter 5000 is a rear leaf spring leveling kit, part number 57398, built to level the rear of a Ford F-250 or F-350 Super Duty when carrying or towing heavy loads. It fits 2005–2010 F-250 and F-350 Super Duty trucks, including Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
The kit uses air springs that adjust from 5 to 100 psi, so the rear height can be set to match the load. It is installed without drilling. It suits owners who want a leaf-sprung rear end to sit level again without replacing the springs.
Key features
- Up to 5000 lbs. of leveling capacity
- 2-ply fabric reinforced air springs
- Air adjustable from 5 to 100 psi
- Quick connect polymer air fittings
- Reinforced air bellows for long lasting strength
- No drill required
- Vehicle specific illustrated installation manuals
- Limited Lifetime Warranty
Towing and payload setup
Owners of F-250 and F-350 Super Duty trucks use leveling kits for different jobs, from pulling a fifth-wheel trailer to hauling loads in the bed. The rear height should be set with the load in place, because an empty truck and a loaded truck sit at different heights. Setting the pressure to match the typical load keeps the steering geometry and headlight aim closer to where the factory intended.
Before installing, check the rear shocks, leaf springs and bushings, since a leveling kit adds support to parts already in place. Look for leaks at the shock mounts and wear on the leaf bushings. Re-check the air lines and brackets after the first trips and after any load change.
- Set pressure with the load in place
- Inspect rear shocks and leaf bushings first
- Recheck brackets after the first trips
- Keep the vehicle within its owner-documented ratings
Specifications
| Brand | AirLift |
|---|---|
| Part number | 57398 |
| UPC | 729199573989 |
| Type of system | Air bag |
| Position | Rear |
| Front or rear application | Rear |
| Fitment type | Direct fit |
| Maximum capacity | 5000 lbs. |
| Air pressure range | 5 to 100 psi |
| Air spring construction | 2-ply fabric reinforced |
| Drilling | No drill required |
| Installation time | 2 hours |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
It fits the 2005–2010 Ford F-250 Super Duty and F-350 Super Duty in Cabela’s, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL and XLT trims.
Ford models outside the F-250 and F-350 Super Duty, including the Excursion covered by the 57340 kit, are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No drilling is required, and AirLift lists installation time at 2 hours. Use the vehicle specific manual for bracket placement and air line routing. Work with the truck on jack stands when you reach the rear axle.
What’s included
The kit includes the air springs, polymer fittings and illustrated manuals. Compare the parts received with your installation plan before starting.









