Overview
The AirLift LoadLifter 5000 57221 is a rear leaf spring leveling kit with 2-ply fabric reinforced air springs, rated for up to 5000 lbs. of leveling. It is an air bag system for the rear of a vehicle, and no vehicle years, makes or models are named.
Air springs inflate between 5 and 100 psi, and the quick connect fittings are polymer, so the rear can be leveled after loading. AirLift includes illustrated installation manuals written for specific vehicles.
Key features
- Two-ply fabric reinforced air springs
- Adjustable from 5 to 100 psi
- Easy-to-use polymer quick connect fittings
- Reinforced air bellows
- Vehicle-specific illustrated installation manuals
- Limited lifetime warranty
Keeping air springs in service
Air springs are rubber-and-fabric bellows, so their service life depends on how they are handled. Heat, road salt, grit and repeated flexing all take a toll on the bellows over time. Keeping the rear suspension clean, avoiding contact with sharp edges, and checking the springs during routine service helps catch small problems before they grow.
Pressure changes are part of regular use with a leveling kit. Adjust in small steps, and let the ride settle before checking height, since a quick reading right after inflating can be misleading. If the rear sags after a few hours, look for a leaking fitting first, because fittings are often the weak point rather than the bellows.
Pairing the kit with other rear work is common. New shocks, bump stops or a rear sway bar can change how the leveled rear feels, so recheck height after any suspension change. Keep the air lines secured with clips so they do not rub or snag on the frame or axle.
- Wipe the bellows clean periodically
- Check fittings with a soapy water test
- Recheck ride height after any suspension change
- Keep air lines clear of sharp edges
Specifications
| Brand | AirLift |
|---|---|
| Part number | 57221 |
| UPC | 729199572210 |
| Leveling capacity | Up to 5000 lbs. |
| Pressure range | 5 to 100 psi |
| Position | Rear |
| Application | Front or rear: Rear |
| Fitment | Direct Fit |
| Type | Air bag |
Vehicle fitment
The kit is a direct fit for the rear position. Make sure the year, model and trim match your vehicle before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The illustrated manuals guide the work, and AirLift quotes an installation time of 2 hours or less. Release air pressure before disconnecting any fitting, because the springs carry loaded weight.
What’s included
Named items are the illustrated installation manuals and the limited lifetime warranty. Check delivered parts against the manual before starting.












