Overview
AirLift’s LoadLifter 5000 Ultimate Plus, part 89284, is a rear air bag kit for the 2015–2018 Ford F-150. It carries a load leveling capacity of 5000 lbs and adjusts from 5 to 100 psi of air pressure.
The kit has an internal jounce bumper housed within its springs. It can run at zero air pressure and installs in 2 hours or less. It is maintenance free.
Key features
- Rear air bag design for the F-150
- 5 to 100 psi adjustable air pressure
- Internal jounce bumper housed in the springs
- Load leveling capacity rated at 5000 lbs
- Operates at zero air pressure.
- Installs in under 2 hours.
Matching the kit to your load
The rear air bags on a newer F-150 carry weight that varies with bed loads, tow hitches and passengers, so the pressure should be set after the kit is installed. Start with the truck loaded as it normally is, then adjust until the rear sits level. Revisit the setting if your typical load changes.
Because the kit is maintenance free, most of the work is inspection rather than service. Look at the bag surface for abrasion where it contacts the frame, check fittings for leaks, and confirm that the mounting hardware remains tight. A rear that slowly loses height after parking usually points to a leak at a fitting or valve.
- Set pressure after installation with the usual load
- Inspect bag surfaces for abrasion
- Check fittings for slow leaks
Specifications
| Brand | AirLift |
|---|---|
| Part number | 89284 |
| UPC | 729199892844 |
| Position | Rear |
| System type | Air bag |
| Air pressure range | 5 to 100 psi |
| Load leveling capacity | 5000 lbs |
| Install time | Under 2 hours |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2015–2018 Ford F-150 in King Ranch, Lariat, Limited, Platinum, SSV, XL and XLT trims.
The 2004–2014 F-150 uses part 89200 rather than this kit. Model years outside 2015–2018 are not covered. Check your year, model and trim before buying.
Installation notes
Set the air pressure after installation to match the load, since the kit is rear-mounted and adjustable. Follow the kit’s written instructions for the steps.
What’s included
Check the package contents against your installation before starting.


















