Overview
Part number AIR57295 is the AirLift LoadLifter 5000 rear leaf spring leveling kit, made for 4WD models only. It is a no-drill air spring kit rated for up to 5000 lbs of leveling.
Installation is listed at 2 hours or less. Two-ply fabric air springs inflate between 5 and 100 psi through quick connect polymer fittings.
Key features
- 4WD models only
- No drill installation
- Up to 5000 lbs leveling capacity
- Two-ply fabric reinforced air springs
- Quick connect polymer fittings
- Reinforced bellows
- Illustrated vehicle-specific installation manuals
- Limited lifetime warranty
Drive type and suspension load
Four-wheel-drive trucks carry their own drivetrain hardware, including transfer case and front axle components, which affects how much rear load is practical. A rear air kit helps keep the back end level, but it does not change four-wheel-drive traction or ground clearance. Keep the air system within its pressure range and check it after changes in load.
Off-road use adds stress through articulation and rock impact. Keep air lines protected from brush and stones, and avoid letting the springs run over sharp edges. After trail days, inspect bellows and fittings before the next outing, since an unnoticed leak can drop the rear unexpectedly.
- Protect lines from brush, rocks and branches
- Check fittings after rough trail sections
- Carry a spare fitting and a tire gauge
Specifications
| Brand | AirLift |
|---|---|
| Part number | AIR57295 |
| UPC | 729199572951 |
| Application | Rear |
| Drive type | 4WD models only |
| Drilling | Not required |
| System type | Air bag |
| Leveling capacity | Up to 5000 lbs |
| Air pressure range | 5 to 100 psi |
| Installation time | 2 hours or less |
| Warranty | Limited lifetime |
Vehicle fitment
Year, make and model are not confirmed for this kit. It is made for 4WD models only, so check your drive type and your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This kit is no drill with installation time of 2 hours or less. Plan the air line routing around moving suspension parts and leak-check every fitting once the springs are filled.
What’s included
The kit comes with air springs, polymer fittings and illustrated installation manuals.









