Overview
The AirLift Ride Control Kit, part number 59556, is a rear air spring kit for the 2011 through 2016 Ford F-250 Super Duty. It uses RideControl air springs to level a loaded truck for greater safety, stability and comfort.
The kit includes two air springs along with all necessary mounting brackets and the hardware needed for installation, as packaged.
Key features
- Two air springs for the rear of the truck
- All necessary mounting brackets included
- All hardware needed for installation included
- Fully illustrated installation guide
- Installation time of 2.5 hours or less
- Designed to level a loaded-down ride for greater safety, stability and comfort
Care for air springs
Air springs take most of their wear from road debris, grit and repeated flexing, so periodic inspection matters more than any single fix. Look at the rubber for cracks, abrasions and bulges, and check the mounting studs and brackets for loosening. A small pressure drop overnight can point to a leak at a fitting or valve, which is easier to find early than after the truck has been loaded for a trip.
Air springs usually work with the factory shocks and bushings, and worn shocks can make a leveled setup feel loose even when the bags are healthy. If the truck regularly carries heavy loads or tows, check the shock absorbers and rear suspension hardware at the same time. Keep the air lines clear of sharp edges and heat sources during every service visit.
- Inspect the bellows for cracks and abrasion
- Check mounting hardware for looseness
- Listen for air leaks near fittings after a loaded trip
Specifications
| Brand | AirLift |
|---|---|
| Part number | 59556 |
| UPC | 729199595561 |
| Position | Rear |
| Application | Rear |
| Air springs included | 2 |
| Installation time | 2.5 hours or less |
| Installation guide | Fully illustrated |
Vehicle fitment
It fits 2011 through 2016 Ford F-250 Super Duty models in King Ranch, Lariat, Platinum, XL and XLT trims, in 2WD and 4WD applications.
Ford F-250 years outside 2011 through 2016 and F-350 or F-450 models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation takes 2.5 hours or less and uses the included brackets and hardware. Follow the fully illustrated installation guide in order, and recheck rear ride height once the springs are set.
What’s included
Two air springs, all necessary mounting brackets, all hardware needed for installation, and a fully illustrated installation guide.
















