Overview
The AirLift LoadLifter 7500 XL, part number 57538, is an air spring load leveling kit built around 7-inch double-bellows air springs. It is aimed at trucks that carry heavy rear loads or tow, and it is compatible with most 5th wheel and gooseneck hitches.
The larger air volume lets the springs reach leveling strength at lower pressures, supporting load lifting and ride quality across different loads. It offers up to 20% more air spring volume than LoadLifter 5000 air springs.
Key features
- 7-inch double-bellows air springs
- Up to 20% more air spring volume than LoadLifter 5000 air springs
- Upper and lower roll plates that protect the air springs from possible abrasion
- Roll plates that increase load capacity up to 10%
- Nylon composite end caps, corrosion-proof and lighter than steel
- Bolt-on installation on most kits using existing frame holes, no drilling required
- Compatible with most 5th wheel and gooseneck hitches
Load leveling for heavy rear loads
Load leveling air springs add support to the rear suspension when weight goes over the axle, and they help keep ride height steady under trailers and cargo. Set pressure to suit the load, since too much pressure can make the ride harsh and too little leaves the rear sagging under weight.
Larger bellows give more air volume at a given pressure, which is why this type of kit is often chosen for heavy towing. When a gooseneck or 5th wheel hitch is involved, check that the hitch mounting points are sound and that the truck frame is in good condition before adding load. Roll plates and end caps should be checked for wear at regular service intervals.
- Inspect bellows for cracks at each oil change
- Check roll plates for wear where they contact the frame
- Keep fittings tight and free of corrosion
- Confirm hitch mounts are rated for the load carried
Specifications
| Brand | AirLift |
|---|---|
| Part number | 57538 |
| UPC | 729199575389 |
| Air spring style | 7-inch double-bellows |
| Air spring volume | Up to 20% more than LoadLifter 5000 air springs |
| Load capacity | Up to 10% increase with upper and lower roll plates |
| End caps | Ultra high-strength, corrosion-proof nylon composite, as strong as steel and lighter |
| Drilling | None required on most kits |
| Hitch compatibility | Most 5th wheel and gooseneck hitches |
| Fitment type | Direct fit |
Vehicle fitment
Check your truck’s year, make, model and trim against the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Most kits bolt to the existing frame holes, so no drilling is needed on those applications. Follow the illustrated installation manual step by step, and check your hitch against the kit’s compatibility range before installing.
What’s included
The kit includes LoadLifter 7500 XL air springs with upper and lower roll plates and nylon composite end caps. Check the included brackets and mounting hardware against your installation steps before starting.
















