Overview
The AirLift Air Lift 1000 Universal Air Spring Kit, part number 60912, is a universal-fit air spring kit with 1000 lbs of leveling capacity. It measures 4 in. in diameter with an 11.00 in. overall length.
Measuring for an air spring
Air springs carry load on a sealed bellows, so the mounting space matters as much as the rated capacity. Measure the compressed and extended lengths where the spring will sit, and leave room for the bellows to move through its travel without rubbing the frame, axle or brackets. Route air lines away from heat sources and moving parts.
Air spring kits usually need an air source and a way to monitor pressure. Check whether your setup will hold the desired ride height under load. Inspect the bellows for cracks, abrasion and leaks periodically. Keep a spare fitting and a small leak test solution on hand for quick checks after installation.
- Check clearance at full compression and full extension
- Route air lines away from heat and moving parts
- Inspect bellows for cracks and abrasion
Specifications
| Brand | AirLift |
|---|---|
| Part number | 60912 |
| UPC | 729199609121 |
| Diameter | 4 in. |
| Overall length | 11.00 in. |
| Leveling capacity | 1000 lbs |
Vehicle fitment
It is a universal fit kit, not built for a named vehicle. Check that the 4 in. diameter and 11.00 in. overall length suit your mounting space before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the mounting space against the 11.00 in. overall length and 4 in. diameter before installing. Plan the install around those two dimensions and check the space first.









