Overview
The AirLift Single Load Controller (part 25850) is an on-board air compressor control system that adjusts air spring pressure with a touch-button display. It is compatible with any brand of air springs.
This single load model is the basic system: it controls the rear bags together for front-to-rear leveling. The dual-path model controls each spring independently for side-to-side and front-to-rear leveling.
Key features
- Touch-button adjustment of air spring pressure
- Display that eliminates bulky mounting panels
- Standard duty compressor
- Works with air springs of any brand
Wiring and power for the controller
The controller and compressor draw power from the vehicle, so the wiring deserves the same care as any other accessory circuit. A fused power connection protects the wiring if something shorts, and a solid ground keeps the controls responding reliably. Route the harness away from heat sources and moving parts, and secure it so it cannot rub against the frame.
Connectors work loose and collect corrosion over time, especially in a vehicle that sees mud, water and road salt. Check the plugs and terminals periodically, and re-secure any clips that have shifted. A quick visual check catches most problems before they show up as a controller that stops responding.
- Use a fused power connection
- Secure wiring away from heat and moving parts
- Check connectors for corrosion regularly
Specifications
| Brand | AirLift |
|---|---|
| Part number | 25850 |
| UPC | 729199258503 |
| Compressor | Standard duty |
| Leveling | Rear bags together, front-to-rear |
| Air spring compatibility | Any brand |
Vehicle fitment
It is a direct fit controller, and no vehicle is named for it. Match it to your vehicle’s air spring setup and mounting points before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The compressor and controller are wired into the vehicle, so use a fused power connection and keep wiring away from heat and moving parts.
What’s included
Standard duty compressor. Confirm the package contents against your installation before installing, including the controller wiring and display.









