Overview
The AirLift Dual Load Controller (part 25856) is a heavy-duty on-board air compressor control system for leveling air springs. It uses a touch-button display to set air spring pressure without bulky mounting panels.
The dual-path design controls each spring independently, which allows side-to-side and front-to-rear leveling. It works with any brand of air springs.
Key features
- Heavy-duty compressor
- Independent control of springs for side-to-side and front-to-rear leveling
- Touch-button adjustment with a display that needs no mounting panel
- Compatible with air springs of any brand
Independent control in practice
Independent control means each side of the suspension is managed on its own, which is what makes side-to-side leveling possible. That is useful when a load sits off center or the vehicle leans on uneven ground. Each side responds to its own pressure, so both sides should be checked after any change in load, not just the one you adjusted.
The compressor has to keep up with the bags it fills, so a fused power connection and a clean ground matter. Route each side’s air line separately so one line can be inspected without disturbing the other. Keep the display where it can be read while you adjust, and watch for uneven height that would point to a leak on one side.
- Route each side’s air line separately
- Check both sides after load changes
- Keep the display within easy reach
Specifications
| Brand | AirLift |
|---|---|
| Part number | 25856 |
| UPC | 729199258565 |
| Compressor | Heavy duty |
| Leveling | Side-to-side and front-to-rear |
| Air spring compatibility | Any brand |
Vehicle fitment
No vehicle is named for this controller, so match it to your vehicle’s air spring setup and mounting points before choosing it. Verify fit against your year, model and trim.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Independent control means each side of the suspension is managed on its own, so plan the air line and wiring routes before mounting the display. Use a fused power connection for the compressor.
What’s included
Heavy-duty compressor. Check the package contents against your installation before starting.
Not included: Air springs are a separate part of the setup, so have compatible bags ready before installation.









