Overview
The AirLift Load Controller II, part 25592, is an on-board air compressor control system from AirLift for leveling a vehicle from side to side. It uses a single gauge and comes with a new wiring harness.
AirLift describes easier and faster installation, a ready air supply and a low pressure sensor, and backs the control system with a two year limited warranty. No vehicles are named, so check fitment before ordering.
Key features
- Levels the vehicle from side to side
- Single gauge
- New wiring harness included
- Easier and faster installation
- Ready air supply
- Low pressure sensor
- Two year limited warranty
Wiring and air line care
Air leveling controllers sit between the switch, the compressor, the valves and the air springs, so the wiring and air lines carry the load of the whole system. Route the harness away from exhaust heat, sharp edges and moving suspension parts, and secure it with clips so it cannot chafe. Air lines should be checked for abrasion and kinks as well, since a small leak can cause the compressor to run more often than expected.
Before installing any leveling controller, look over the battery terminals, fuses and grounds the system relies on. A clean ground and a properly sized fuse protect the controller and the compressor from voltage problems. Re-check connections after the first few drives, when the harness and lines have settled into their final routing.
- Keep wiring clear of heat and moving parts
- Use clips to prevent chafing
- Check air lines for kinks and leaks
Specifications
| Brand | AirLift |
|---|---|
| Part number | 25592 |
| UPC | 729199255922 |
| Gauge | Single |
| Sensor | Low pressure sensor |
| Warranty | Two year limited |
Vehicle fitment
No year, make, model or chassis is named for this control system, so fit is not confirmed by vehicle.
Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes a new wiring harness, so plan for that harness during installation. Air leveling systems combine electrical and air line connections, so disconnect the battery before wiring work.
What’s included
A new wiring harness is included. No other included components are specified.









