Overview
The AirLift WirelessAir app-only system, part number AIR73000EZ, pairs an EZ Mount on-board air compressor with the WirelessAir mobile app and no separate controller. It adjusts air pressure for any brand of aftermarket air spring, so it is not tied to one vehicle.
The EZ Mount design and the app keep installation and control simple. This is a single adjustable system and is not height sensing, so pressure is set by hand from a phone rather than by ride height. The air tank and gauge are not included.
Key features
- EZ Mount on-board air compressor
- Controlled through the WirelessAir mobile app, with no separate controller
- Works with any brand of aftermarket air spring.
- Single adjustable system
- Not height sensing
Planning the tank and gauge
An on-board compressor fills the air springs directly, but it works best with a tank that smooths out the demand. A tank lets the compressor run in shorter bursts, which reduces heat and wear. The tank size should suit the number of springs and how often the pressure will be changed on the road.
A gauge is useful for checking the pressure that the app reports, and for confirming that the springs hold the setting overnight. Route the air lines away from sharp edges and moving parts, and run a leak check at each fitting after the first fill. Moisture collects in compressed air, so a drain point and a filter are worthwhile additions.
- Choose a tank sized for the number of springs
- Add a gauge for checking the app readings
- Route air lines clear of sharp edges
Specifications
| Brand | AirLift |
|---|---|
| Part number | AIR73000EZ |
| Product line | WirelessAir app only, with EZ Mount compressor system |
| Controller | None; mobile app only |
| Adjustment | Single adjustable |
| Height sensing | No |
| Air tank | Not included |
| Gauge | Not included |
| Fitment | Universal fit, no vehicle named |
Vehicle fitment
It is a universal fit with no make, model or year named. Compatibility depends on the air springs already on the truck, so match them to the system before ordering.
Check the air spring brand and compressor requirements against your truck before ordering, since the system is not tied to a specific model.
Installation notes
Because the air tank and gauge are not included, plan for them separately before installing the EZ Mount compressor. Check the air line connections to your air springs before the first use.
What’s included
The WirelessAir app-only setup with the EZ Mount on-board air compressor system, part number AIR73000EZ. The air tank and gauge are not included.











