Overview
The AirLift Air Lift 1000 rear coil spring, part number 60808, is an add-on helper spring for the 2007–2009 Chrysler Aspen (Limited, Limited Hybrid) and the 2004–2009 Dodge Durango (Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT).
The helper spring reduces bottoming out on a coil suspension. The air adjustable design lets you set the ride for towing, hauling or light use. It is a rear-position part with an air bag system.
Key features
- Rear helper spring for coil suspensions
- Designed to reduce bottoming out
- Air adjustable for custom tuning
- Direct fit for the Aspen and Durango listings
- Drill-free fitting
- Installation is listed at 1 hour or less
Towing and the rear end
Rear helper springs are used on full-size SUVs when the rear end needs extra support for passengers, cargo or a hitch load. The helper carries part of the weight that the factory coil would otherwise handle alone, which keeps the rear from dropping low. Because the setup is adjustable, drivers can change ride height for each trip.
Before adjusting, look at the bump stops, shocks and bushings, since worn parts can hide the benefit of a helper. Check the air fittings for leaks after installation and recheck the hose routing around moving suspension parts. Set the pressure with the vehicle level and loaded as it normally runs, so the reading reflects real use. Retighten fasteners after the first few drives.
- Level the vehicle before measuring ride height
- Check hose routing after each suspension inspection
- Keep a record of the pressure used for common loads
Specifications
| Brand | AirLift |
|---|---|
| Part number | 60808 |
| UPC | 729199608087 |
| Product line | Air Lift 1000 |
| Position | Rear |
| Application | Rear coil spring suspension |
| System type | Air bag |
| Fitment type | Direct fit |
| Drilling | No drill |
| Installation time | 1 hour or less |
Vehicle fitment
Fitment covers the 2007–2009 Chrysler Aspen in Limited and Limited Hybrid trims, and the 2004–2009 Dodge Durango in Adventurer, Limited, Limited Hybrid, SE, SLT, ST and SXT trims.
Chrysler Aspen years outside 2007–2009 and Dodge Durango years from 2010 onward are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The fitting does not require drilling. Check the air fittings for leaks after installation, and work on the rear suspension only with the vehicle securely supported on stands.
What’s included
Review the packaging contents against your installation plan before starting, including any hardware.









