Overview
The AirLift 57204 LoadLifter 5000 is a rear leaf spring leveling kit made for half-ton vehicles. It is an air spring kit for carrying load, designed to keep rear ride height steady when weight is added.
The kit is engineered for a specific vehicle rather than a one-part-fits-all design. It is designed to give a factory look and performance with minimal drilling and no welding. The design is intended to support braking and steering, reduce sway and limit bottoming out.
Key features
- Engineered for a specific vehicle, not a generic kit
- A heavy-load air spring kit from AirLift
- Minimum drilling and no welding
- Made for half-ton vehicles
- Rear position, direct fit
- Installation time of 2 hours or less
Heavy loads and leveling
Half-ton trucks often carry loads that pull the rear down and change steering and braking feel. A leveling kit aims to bring the rear back toward a steady height so the front and rear work together, but it does not change the truck’s rated capacity. Load ratings for the axles, tires and frame still apply, so keep the load within the vehicle’s rated limits.
Because the kit is engineered for a specific application, mounting points and clearance matter more than general fit. Check tire clearance at full compression, make sure the brake and fuel lines are not stretched, and confirm the air lines avoid the exhaust and moving parts. After the first drive, recheck fasteners and look for rubbing.
- Check tire clearance at full suspension compression
- Keep brake and fuel lines free of strain
- Route air lines away from the exhaust
- Recheck fasteners after the first drive
Specifications
| Brand | AirLift |
|---|---|
| Part number | 57204 |
| UPC | 729199572043 |
| Position | Rear |
| Fit type | Direct fit |
| Vehicle class | Half-ton vehicles |
| Installation time | 2 hours or less |
Vehicle fitment
No year, model or trim is named for this kit. The half-ton vehicle class is a truck category and does not on its own confirm fit. Confirm your vehicle’s year, model and trim before ordering.
Because the kit is engineered for one vehicle, confirm the exact application before choosing it. Match the year, model and trim to your truck before buying.
Installation notes
The kit needs minimal drilling and no welding. Review the mounting steps for your vehicle before starting, and support the truck securely on stands while working on the rear suspension.
What’s included
Check the package contents against your installation before starting.














