Overview
The Addictive Desert Designs intercooler upgrade kit, part number IC1650KIT, is an intercooler and tube kit named for the 17-Current Ford F-150 Raptor. It is built for trucks running Addictive Desert Designs front winch bumpers, and its mounting beam is designed for frame cut and winch mount bumper setups.
The 18 core intercooler is designed to maximize airflow to support horsepower and torque. Its airflow benefits depend on the rest of your setup, so judge results after installation.
Key features
- 18 core intercooler designed to maximize airflow
- 100% TIG welded construction
- Steel mounting beam for off-road use
- Mount design optimized for frame cut and winch mount bumpers
- Direct bolt-on installation
- Claimed 8.5% more flow than the nearest competitor
Intercooler upgrades and heat management
An intercooler cools the compressed air before it enters the engine. Cooler charge air is denser, which supports consistent power under load, and it reduces the chance of heat soak during towing or hard driving. The benefit depends on how well the core is cooled by airflow through the front of the truck.
Core size is only one part of the setup. Charge pipes, couplers and clamps carry the boosted air, so any leak undoes the cooling. A winch bumper also changes airflow through the front end, so check that nothing blocks the core. Look at intake tubes and fan shrouds once the install is complete.
- Inspect couplers and clamps after installation
- Check for oil spray near the joints
- Keep the core free of mud, leaves and debris
- Recheck the mounting beam bolts after rough trail runs
Specifications
| Brand | Addictive Desert Designs |
|---|---|
| Part number | IC1650KIT |
| UPC | 802959465721 |
| Intercooler core | 18 core |
| Construction | 100% TIG welded |
| Material | Aluminum |
| Mounting beam | Steel |
| Bumper compatibility | Addictive Desert Designs front winch bumpers, frame cut and winch mount bumpers |
Vehicle fitment
The kit is named for the 17-Current Ford F-150 Raptor and is built for Addictive Desert Designs front winch bumpers. Confirm the year and trim for your truck before ordering.
The kit is made for front winch bumpers, so it is intended for trucks running that setup. Confirm your truck’s year, model and trim before buying.
Installation notes
Direct bolt-on installation is designed for this kit. The mounting beam suits frame cut and winch mount bumpers, so confirm your bumper style before starting. Check clearances and tube fit with the bumper in place before finishing the install.
What’s included
The kit includes the 18 core intercooler, intercooler tube(s) and the steel mounting beam.
Not included: the Addictive Desert Designs front winch bumper the kit is designed to fit.
















