Select your vehicle

7/8″ D-Ring Isolator Set

Rugged Ridge

Shop Rugged Ridge D-Ring Isolators on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rugged Ridge 11235.71 red urethane D-ring isolator set for 7/8-inch shackles
  • Kit includes 4 isolators and 8 washers
  • UPC 804314294670
  • Universal fit, chosen by shackle size

Description

Overview

The Rugged Ridge 11235.71 is a red urethane D-ring isolator set for 7/8-inch recovery shackles. Each polyurethane isolator snaps over the shackle’s outer edge, covering the metal that would otherwise hit the bumper or nearby parts. The part attaches to the shackle, so the set is universal fit and not tied to a vehicle.

Urethane washers sit between the shackle pin and the mounting tab. They cover the pin, the spot where much of the clanging begins, so the metal parts do not knock together.

Key features

  • Molded from energy-absorbing polyurethane
  • Snaps over the outer perimeter of the shackle
  • Urethane washers isolate the pin from the mounting tab
  • Red urethane finish

Keeping the set quiet

Rattle usually comes from the shackle body striking a bumper or the pin knocking against its mount. Isolators cover the contact points, and washers take up space at the pin so the metal stays apart. Neither part changes the shackle’s strength, so inspect the shackle for bends or cracks as you would any recovery gear.

Urethane does not last forever under constant sun and grit. Look for hardening, surface cracks or a loose fit after a season of use, and swap any worn piece before it lets the metal touch again. Keeping a spare set of washers in the toolbox makes that swap quick on the trail.

  • Keep the pin fully seated before loading
  • Check for splits after desert or rock runs
  • Wipe off mud so the fit stays snug

Specifications

Brand Rugged Ridge
Part number 11235.71
UPC 804314294670
Shackle size 7/8-inch
Color Red urethane
Pack contents 2 complete sets: 4 isolators, 8 washers

Vehicle fitment

Universal fit. This set is not vehicle-specific and is sized to 7/8-inch D-ring shackles. Check the shackle diameter before fitting.

A 3/4-inch set in the same line is a different part number.

Installation notes

Work each isolator over the shackle body, then seat the washers between the pin and the mounting tab. Check that the pin sits fully home before loading the shackle.

What’s included

Two complete sets with 4 isolators and 8 washers.

Not included: D-ring shackles.

SKU: RUG11235.71 Category:

Specification

Shipping weight 1.00 lbs
Package dimensions 12.00 × 8.80 × 4.00 in
brands

Questions & Answers

What shackle size does the 11235.71 fit?

It is sized for 7/8-inch D-ring shackles. Measure the shackle diameter before fitting, because the set is chosen by shackle size and is not tied to any vehicle.

How many isolators are in this set?

The kit holds 4 isolators and 8 washers in total, which is enough to fit 4 shackles. Each isolator snaps over the outer rim of a single shackle, and the washers go at the pin.

What is the UPC of the 11235.71?

The UPC is 804314294670. Pair it with part number 11235.71 when confirming you have the 7/8-inch version, since the 3/4-inch set is a different part number.

Can the isolators be used on a different shackle size?

Not reliably. The isolator is molded to a set diameter, so a shackle of another size may sit loosely or not seat at all. Measure the shackle first and match the isolator to that measurement before fitting.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Rugged Ridge D-Ring Isolators on Amazon