Overview
The 4 Wheel Parts T-Series wheel, part number 4WP5014-298550, is a 20 x 9 inch aluminum split spoke wheel in satin black. It has a 5 on 5.5 bolt pattern, a 108 center bore, a 0 offset and a 5-inch backspacing.
The 4 Wheel Parts T-Series wheel is built for trail and open-country off-road driving. It is a split spoke aluminum design with a satin black finish.
Key features
- Aluminum construction
- Split spoke design
- Satin black finish
- 20-inch diameter and 9-inch width
- 5 on 5.5 bolt pattern
Measuring your hub before buying
Hub measurements decide whether a wheel will mount at all. Count the lug holes and measure across the bolt circle, lug center to lug center, to confirm the pattern. Measure the hub’s center pilot diameter as well, since it must match or be smaller than the center bore. A tape measure and a bolt pattern gauge are simple tools for this.
Offset and backspacing are the next check. They control how far the wheel sits in the fender and how much room it has for brake parts. If the original wheels had a different offset, expect some change in stance and clearance, so compare before committing. Keep your measurements written down for future wheel shopping.
- Measure bolt pattern across the bolt circle
- Compare center bore to the hub pilot
- Note offset and backspacing from current wheels
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 4WP5014-298550 |
| Series | T-Series |
| Diameter | 20 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Split spoke |
| Construction | Aluminum |
| Finish | Satin black |
Vehicle fitment
Confirm the bolt pattern, center bore and offset against your hub before choosing this size.
Installation notes
The 5 on 5.5 bolt pattern and the 108 center bore have to match your hub. Offset and backspacing decide how the wheel sits against the fender and the brake clearance.
An offset of 0 places the mounting face at the centerline of the wheel’s width, so the tire sits evenly with the hub. A 5-inch backspacing is the distance from the mounting face to the inner lip, which sets how much room the wheel has behind it.

















