Overview
The 4 Wheel Parts Factory S-Series wheel, part number 4WP8018-793650, is a 17 x 9-inch aluminum wheel with a 3D mesh design. It has a 6 on 135 bolt pattern, an offset of 0 and a backspacing of 5.
The S-Series is a clean-look street wheel for truck and Jeep owners moving to a larger tire.
The 6 on 135 pattern has six lugs on a 135 bolt circle, so the hub must match it precisely. This 17 x 9 wheel sets an offset of 0 and a backspacing of 5, which together control where the wheel sits in the wheel well. Fitment depends on those numbers and on the brake and suspension clearance of the specific vehicle. The 3D mesh design with milled accents gives the gloss black milled finish its look, and the aluminum body carries that look.
The 17 x 9 size and the gloss black milled finish are the two visible specifications of this wheel.
Key features
- 3D mesh design
- Milled accents
- Gloss black milled finish
- 17-inch diameter, 9-inch width
- 6 on 135 bolt pattern
Lug pattern and hub fit
A six-lug 135 pattern is common on larger trucks and some SUVs, and it is less forgiving than a four or five-lug layout. Each stud must line up with its hole, and the wheel must sit flat against the hub face. Check that the lug nut seats fully before driving, and that no lug hole is partly blocked by a bracket or brake part.
Offset affects steering load and bearing wear. Wheels that sit far inboard or outboard change the scrub radius, which can make steering feel heavier or pull the wheel toward the fender. Larger overall tire sizes also change speedometer reading and fender clearance, so measure the wheel well before stepping up in tire size.
- Torque lug nuts in a star pattern
- Re-check torque after the first few drives
- Inspect the wheel face for cracks after rough trails
- Measure inner fender clearance at full lock
Specifications
| Brand | 4 Wheel Parts |
|---|---|
| Part number | 4WP8018-793650 |
| Series | S-Series |
| Diameter | 17 inches |
| Width | 9 inches |
| Offset | 0 |
| Backspacing | 5 |
| Bolt pattern | 6 on 135 |
| Style | 3D mesh |
| Finish | Gloss black milled |
| Construction | Aluminum |
Vehicle fitment
Confirm the 6 on 135 bolt pattern, offset and backspacing against your vehicle before ordering.
















