Overview
The Hella 355mm Pigtail, part number H84985451, is a 355mm lead fitted with a 6 pin DT connector. It is a universal fit part.
Confirm the pinout and wire functions against your own harness before connecting the pigtail, because no harness or circuit application is named.
Routing and splicing basics
A pigtail is a short lead with a connector on one end and loose wires on the other, used to join a sensor, lamp or accessory to an existing harness. Splicing it in place of a damaged section is common, but every splice should keep the wire function and polarity the same as the original circuit. Heat-shrink insulation and solder joints, or crimped connectors rated for automotive use, keep moisture away from the connection.
Before cutting anything, trace the circuit with a multimeter or a wiring diagram for the vehicle. Mark each wire on the pigtail and the harness so the matching pairs are not confused later. Sealed connectors help in damp areas such as the engine bay or underbody, where road salt and spray can corrode bare terminals.
- Confirm the connector family matches the mating plug before cutting.
- Test the circuit with the key off, then again with power on.
- Tape or heat-shrink each splice and secure the lead away from heat.
Specifications
| Brand | Hella |
|---|---|
| Part number | H84985451 |
| UPC | 760687126522 |
| Length | 355mm |
| Connector | 6 pin DT |
| Fitment | Universal fit |
Vehicle fitment
The fitment label reads universal, with no harness, circuit or vehicle named.
Confirm your vehicle’s year, model and trim before ordering.









