Ford F-350 Suspension
67 suspension listed for the 1958–1997 Ford F-350
Every part on this page is listed by its maker for this model; the most represented brands are Skyjacker, Pro Comp Suspension and Bilstein. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Narrow it down: Shock Absorbers 47
Showing 1–24 of 67 resultsSorted by popularity
-
Leaf Spring
Skyjacker Softride Leaf Spring Rear – FR56S
- Rear Softride leaf spring, part number FR56S, with pre-installed rubber bushings
- Lift height range 5 to 6.99 inches
- Covers 1973–1998 Ford F-100, F-150, F-250 and F-350 pickups and 1978–1996 Bronco
- Single spring; order two for a pair
SKU: SKYFR56S -
-
-
Radius Arm Bracket
Center Hinge Drop Bracket
- Skyjacker LHB75 left center hinge drop bracket, direct fit per the brand
- Fits 1980–1998 Ford F-250 and 1980–1997 Ford F-350
- Includes the 1997 Ford F-250 HD in XL and XLT trims
- Part number LHB75, UPC 803696146034
- Limited lifetime warranty per Skyjacker
SKU: SKYLHB75 -
Shock Absorbers
Skyjacker M95 Performance Monotube Shock Absorber – M9560
- Rear gas monotube shock, part number M9560, from the M95 Performance series
- Made for Chevrolet and GMC pickups, Ford Bronco and F-series, Mazda and Toyota trucks
- Years range from 1967 to 2018 across the list
- Listed lift value reads 10 – 9.5 in.; confirm before ordering
SKU: SKYM9560 -
Leaf Spring
Skyjacker Softride Leaf Spring Front – F860S
- Fits listed 1980–1998 Ford F-250, 1997 F-250 HD and 1980–1997 Ford F-350 trucks
- Front Softride progressive multileaf leaf spring, part number F860S
- Lift height range 5 to 6.99 inches
- Bushings not included; recommended bushing SKYSE80F
- Single spring per part number
SKU: SKYF860S -
Leaf Spring
Skyjacker Softride Leaf Spring Front – F840S
- Fits listed 1980–1998 Ford F-250, 1997 F-250 HD and 1980–1997 Ford F-350 trucks
- Front Softride progressive multileaf leaf spring, part number F840S
- Lift height range 0 to 4.99 inches
- Bushings not included; recommended bushing SKYSE80F
- Single spring per part number
SKU: SKYF840S -
-
-
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8060
- Rear Skyjacker Softride Nitro shock, part number N8060, with 150 PSI nitrogen gas
- Fits Ford, Chevrolet, GMC, Mazda and Toyota trucks and SUVs from 1965 to 2018, by model and year
- Bonded iron piston and chromed piston rod
- Red polyurethane bushings and red boot
- Carries a limited lifetime warranty
SKU: SKYN8060 -
Shock Absorbers
Skyjacker Softride Hydro Shock Absorber – H7060
- Skyjacker Softride Hydro rear shock, part number H7060
- Listed fitment covers Chevrolet, Ford, GMC, Mazda and Toyota trucks and SUVs
- Hydraulic twin tube with 5/8 inch hardened double chrome rod
- Confirm the lift range your suspension needs before ordering
SKU: SKYH7060 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999118
- Rancho RS999118 rear RS9000XL shock absorber for a 2 to 3 inch lift.
- Fitment list covers Chevrolet, GMC, Dodge, Ford, Jeep and Toyota models from 1972 to 2002.
- 18mm piston rod with 9-position manual or remote tuning.
- Nitrogen gas charged, protective boot included.
SKU: RANRS999118 -
Shock Absorbers
Rancho RS9000XL Series Shock Absorber – RS999029
- Rancho RS999029 front shock absorber for Ford Bronco and F-Series trucks plus Dodge Dakota and Durango
- Listed with no lift or drop (w/0 in. Lift/Drop)
- Nine-position manual or remote tuning system
- 2.75-in. (70mm) body with an 18mm chrome rod
- Protective boot and red urethane bushings included
SKU: RANRS999029 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 924509
- Rear ES9000 Series gas charged twin tube shock with loop mounts at both ends
- Fits many Chevrolet, GMC, Ford, Dodge, Jeep, Toyota, Isuzu, Mazda and Mercury trucks and SUVs
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Rated for a 2.5 to 4 in lift
- Shock boots sold separately
SKU: EXP924509 -
Shock Absorbers
Pro Comp ES9000 Series Shock Absorber – 915510
- Pro Comp ES9000 front shock, part number 915510, stem upper and loop lower mounts
- Extended 15.69 inch, collapsed 10.02 inch, travel 5.67 inch
- Long fitment list of Ford trucks and SUVs from 1980 to 2012, plus Honda, Isuzu, Mazda and Suzuki entries
- Rated for 0 in. lift or drop; 10-stage valving, non-adjustable
SKU: EXP915510 -
Shock Absorbers
Pro Comp ES3000 Series Shock Absorber – 324509
- Rear shock for a long list of Chevrolet, GMC, Dodge, Ford, Jeep, Mazda, Toyota, Isuzu and Mercury trucks and SUVs
- Part 324509, ES3000 Series, rated for a 1 to 4 in. lift
- Extended length 24.84 in, collapsed length 14.82 in, travel 10.02 in
- Loop upper and lower mounts, hydraulic, non-adjustable
SKU: EXP324509 -
-
Leaf Spring Shackle Bushing
Prothane Motion Control Frame Shackle Bushing Kit (Black) – 6-802-BL
- Prothane Motion Control black polyurethane frame shackle bushing kit, part 6-802-BL
- Rear frame shackle position, non-greaseable direct fit
- Fits 1980–1998 Ford F-250, 1997 F-250 HD and 1980–1997 Ford F-350
- Resists oils, road salt, chemicals, ozone and smog, per Prothane
SKU: D/I6-802-BL -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 24-013291
- Bilstein 46mm monotube rear shock absorber, part number 24-013291
- Heavy duty gas charged design, yellow finish, lift/drop 0 in
- Fits Ford F-150 (1985–1996), F-250 (1980–1996, 1998), F-250 HD (1997), F-350 (1980–1997) and F-350 Super Duty (1999–2016)
- Old part numbers BILF4-B46-1329-H1 and BILF4-B46-1329-H2
SKU: BIL24-013291 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8055
- Front gas-charged Nitro shock, part number N8055, with stated collapsed and extended lengths
- Fits many 1966-2001 Ford Bronco, Jeep, Isuzu, Honda, Mazda and Toyota models
- 150 PSI nitrogen gas charge, twin tube construction, white body
- Rated for 2 – 6 in. lift, with a red polyurethane boot
SKU: SKYN8055 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8054
- Front gas-charged Nitro shock, part number N8054
- Fits a broad range of 1961-2016 Ford, Toyota, Dodge, Mazda, Nissan and Suzuki models
- 150 PSI nitrogen gas charge with multi-stage velocity sensitive valving
- Rated for 0 – 1 in. lift, with a red boot included
SKU: SKYN8054



















