Overview
The Curt Manufacturing 83072 is a weld-on pocket anchor, a fitting that is welded in place to take a tie down. It fits universally rather than being built for one make, model or year.
The weld-on design is the main installation consideration. The anchor is meant to be welded rather than bolted, so the mounting surface and welding work need to be planned before the part is set.
Key features
- Weld-on pocket design
- Raw finish
- 1 5/8 in. X 3.5 in. ID opening
- Universal fit
Planning a weld-on mount
A weld-on pocket is a permanent choice, so the mounting plan matters more than the anchor itself. Decide where the load needs to be held, then choose a surface thick enough to take the weld without burning through. Mark the location before any cutting or grinding begins, and confirm that nothing important sits behind the panel.
A raw finish anchor will rust once welded unless the surrounding area is cleaned and protected. Clean the weld zone, prime bare metal, and seal the seam so moisture does not sit under the joint. Recheck the weld after the first heavy tie down, looking for hairline cracks around the pocket.
- Plan the mounting spot before welding
- Clean and prime the weld area afterward
- Check the joint for hairline cracks
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | 83072 |
| UPC | 612314107209 |
| Type | Weld-on pocket anchor |
| Finish | Raw |
| Size | 1 5/8 in. X 3.5 in. ID |
Vehicle fitment
It is a universal fit anchor, so suitability depends on your frame, mounting location and welding plan. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Weld-on installation means welding the pocket to the mounting surface. Have a qualified welder fit it, and keep welding clear of fuel lines and wiring.
What’s included
The anchor is the only item provided.
Not included: Welding equipment and any welding consumables are not part of this product.
















