Overview
The Curt Manufacturing winch mount plate, part number CRT31010, gives a solid mounting place for a winch. It also shields the winch from rock damage and debris while you are on an off-road trail.
The mount fits a variety of winches. Its shank fits a 2 in x 2 in receiver tube, and it accepts CURT winch mount handles, which make the winch easier to carry when it is removed from the vehicle.
Key features
- Solid mounting place for a winch
- Shields the winch against rock damage and debris
- Shank fits a 2 in x 2 in receiver tube
- Three mounting holes for an adjustable design
- Accepts CURT winch mount handles
- Handles also give a firm handhold during winch operation
Using a receiver mount safely
A receiver-mounted winch plate puts the winch’s weight and pull on the hitch, so the fit between shank and receiver matters. Check that the receiver tube is in good condition, free of rust or deformation, and that the pin and clip fully engage. A loose fit can shift the winch under load and cause the plate to bend.
The plate guards the winch from rocks and debris, but it needs inspection too. Check the mounting holes for elongation, and look for cracks in welds or the shank. Keep the mount clean of mud and grit, and tighten the fasteners after the first few trail runs. A winch on an adjustable mount can be moved for weight balance or clearance.
- Inspect the receiver tube for rust or bending
- Use a secure hitch pin and clip
- Recheck winch bolts after the first trail runs
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT31010 |
| Receiver tube fit | 2 in x 2 in |
| Mounting holes | 3 |
| Accessory compatibility | CURT winch mount handles |
Vehicle fitment
The fitment is universal, and this mount is not tied to a vehicle list. Check that the winch’s mounting pattern matches the three mounting holes and that the receiver fits your vehicle.
Check year, model and trim against your vehicle before ordering. Match the winch’s mounting pattern to the three holes.
Installation notes
The shank fits into a 2 in x 2 in receiver tube, and the three mounting holes allow an adjustable position for the winch.
What’s included
The mount plate is the item here. Check the parts against your installation before starting, including whether handles are needed.









