Overview
The Curt Manufacturing 83061 is a fold-away rope hook, a tie-down anchor for trailers, pickup trucks and vans. It gives ropes, bungee cords and straps a fixed point. Unsecured loads can endanger you, your passengers and other drivers, and can damage a trailer, a truck bed, a cargo area or the cargo itself. It is a universal fit, so it is not built for one specific vehicle.
The hook folds so that it sits flush with its base when you are not using it, which keeps it out of the way. That makes it especially useful in truck beds and passenger vehicle cargo areas, where a protruding hook would catch on gear. The chrome-plated finish and 1,200 lbs. capacity suit general cargo management in trailers, trucks and vans. Use it with rope, cord or strap as the load requires, and pair it with cargo straps or safety chains when you need a fuller tie-down setup.
Key features
- Fold-away design sits flush with the base when not in use
- Adds an anchor point for ropes, bungee cords or straps
- Rated capacity of 1,200 lbs.
- Chrome-plated finish
- Can be mounted on various surfaces
- Includes all necessary hardware for a complete installation
Choosing a tie-down spot
A rope hook is only as useful as the surface it is bolted to. Trailer walls, truck bed sides and van cargo areas each have different thicknesses and layouts, and some hide structure behind the panel. Pick a spot where the panel is backed by framing or a solid crossmember, and keep the hook clear of sharp edges where a rope could fray.
Think about how the hook will be used. A hook near the front of a cargo area suits short straps to hold a tote, while a hook placed low on a trailer wall helps with bungee cords on loose gear. Plan the spacing so ropes can run at a low angle, since steep angles put more stress on the anchor and the surface around it.
Before each trip, look at the hook and its mounting. Check for loose fasteners, cracks in the surrounding panel and bending of the hook under load. Retighten hardware and replace any part that shows damage.
- Mount into framing or a solid crossmember
- Keep ropes at a low angle to the anchor
- Inspect the hook and fasteners before each trip
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | 83061 |
| UPC | 612314106042 |
| Product type | Fold-away rope hook tie-down anchor |
| Capacity | 1,200 lbs. |
| Finish | Chrome-plated |
| Mounting | Bolt-on |
Vehicle fitment
The hook is a universal fit for trailers, trucks and full-size vans, and no particular make, model or year applies. Mounting depends on the surface you choose, so the mounting spot matters more than the model of your truck or trailer.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hook is a bolt-on accessory, and all necessary hardware is included, so you can plan the mounting location before you open the package. Check that the chosen surface is solid enough for the loads you tie off to it.
What’s included
The fold-away rope hook and all necessary hardware for a complete installation.














