Overview
The Warrior vacuum pump relocation bracket, part number 5905, is a powder-coated steel bracket kit for the 2012-2016 Jeep Wrangler JK. It moves the vacuum pump out of the front bumper area. On a 2012 or newer Wrangler, the small pump between the frame rails often has to be moved when an aftermarket front bumper is installed.
The kit relocates the pump into unused space under the hood. It includes the bracket and the installation hardware, and it fits 2-door and 4-door models. The existing wiring must be extended for the added length, and the wiring extension is not included.
Key features
- Moves the vacuum pump out of the front bumper area
- Relocates the pump to unused space under the hood
- Powder-coated steel bracket
- Hardware needed for installation included
- For 2-door and 4-door models
- Direct fit
Before you start the install
Moving the vacuum pump is mostly a wiring and hose job, so set aside time to route the new harness cleanly. Keep the wiring away from hot exhaust components, moving suspension parts and sharp edges, and secure it with clips at regular intervals.
After the pump is relocated, run the engine and check for leaks at every hose connection. Confirm that the pump still operates as expected and that no warning lights appear. A quick recheck of the bracket bolts after the first few drives helps catch any loosening early.
- Route the extended wiring away from heat and moving parts
- Secure harness runs with clips at regular spacing
- Check hose connections for leaks after startup
- Recheck bracket bolts after the first drives
Specifications
| Brand | Warrior |
|---|---|
| Part number | 5905 |
| UPC | 634146059051 |
| Product type | Vacuum pump relocation bracket kit |
| Material | Steel bracket, powder coated |
| Hardware | Installation hardware included |
| Body styles | 2 and 4-door models |
| Wiring | Extension of existing wiring needed (not included) |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for 5905 covers the 2012-2016 Jeep Wrangler (JK), including 2-door and 4-door versions.
It does not fit the 2007-2011 JK, the 2018 JK, the TJ, the LJ or the JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The existing vacuum pump wiring will need to be extended for the added length, and the extension is not part of the kit. Install the bracket before or with the aftermarket front bumper so the pump is clear of the bumper area.
What’s included
- Powder-coated steel relocation bracket
- Hardware needed for installation
Not included: the wiring extension.









