Overview
The Rugged Ridge XHD Rear Corner Guards, part number 11615.21, are 3mm steel plate rear corner guards for the 2007–2018 Jeep Wrangler (JK) 2-door.
Rugged Ridge built the XHD Corner Guards to protect factory sheet metal from impacts on and off the trail. The 3mm steel plate is molded to the contours of the Jeep and finished in a heavy duty textured black powder coat that resists rock chips, rust and corrosion. The guards fully surround the tail lights, shielding them from direct impacts. They work with all factory components and most aftermarket flares and accessories. The 4-door version is sold separately under part number 11615.20. Rear corners are exposed to rocks and trees on the trail, and tail lights are often among the first parts to break. Thinner corner armor often leaves the lights open to impact, which these guards are designed to avoid.
Key features
- Constructed from 3mm thick steel plate
- Molded to the contours of the Jeep
- Heavy duty textured black powder coat
- Resists rock chips, rust and corrosion
- Fully surrounds the tail lights
- Works with factory components and most aftermarket flares and accessories
- Short corner style for 2-door models
Care and inspection
Corner guards mostly work as a barrier, so their job is to take the first hit from rocks, stumps and tree limbs before the body panel or the tail light does. On a trail, the rear corners are where a Jeep most often scrapes when it climbs or drops off a ledge, and a steel guard with a textured coat handles that abuse better than a thin stamped panel. Before buying, measure your tire size and compare it with the guard’s position, because larger tires and flares change how much room the guard has.
After installation, look over the guards once a season for chips in the coat and for rust starting at cut edges or drill holes. Touch up bare metal with a steel primer and matching paint so moisture does not get under the coat. Check the tail light wiring and gaskets after the guards are in, since the guards sit close to the lights and any rubbing can loosen connections over time.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11615.21 |
| UPC | 804314297862 |
| Product type | Rear corner guards (XHD corner guards) |
| Material | Steel plate, 3mm thick |
| Finish | Textured black powder coat |
| Corner type | Short |
| Body style | 2-door (4-door version is 11615.20) |
| Fitment type | Direct fit |
| Installation type | Cutting or drilling required |
Vehicle fitment
Rugged Ridge lists part number 11615.21 for the Jeep Wrangler (JK) from 2007 to 2018 in 2-door form. The 4-door JK uses a different part number, 11615.20.
4-door JK models need part number 11615.20, and the TJ, LJ and JL generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan for cutting or drilling during installation. Because the guards surround the tail lights and work with most aftermarket flares, check clearance if you already run flares or other rear accessories.
What’s included
A set of XHD rear corner guards for the 2-door Wrangler JK. Check the package contents against your installation before starting.






















