Overview
The Warrior S90802 is a pair of front fender rock protectors made from 12-gauge steel with a smooth black finish. They fit the 1987-1995 Jeep Wrangler (YJ) and are in the fender deflector category.
These covers protect the front fenders from rock chips and from tree and shrub limbs when off-roading. Sold as a pair, they have cutouts for factory signal lights where applicable. They are direct fit and cover the front fenders of the Wrangler YJ.
Key features
- Front fender rock protectors, sold as a pair
- 12-gauge steel
- Smooth black finish
- Protects fenders from rock chips and from tree and shrub limbs
- Cutouts for factory signal lights where applicable
- Direct-fit for the 87-95 Wrangler YJ
- Listed in the Fender Deflector category
Trail fender protection
Front fenders take a lot of contact on trails, and branches and rocks can scrape paint and bend thin metal long before the rest of the body shows wear. A fender protector gives that contact area a tougher skin, which is useful for Jeeps that spend time in brush or rocky ravines. Steel protectors are heavier than plastic ones but resist being punctured, which suits hard trail use.
Think about how the protector will sit against the tire and the steering. Clearance changes once the tire is turned or the suspension cycles, so test fit with the wheels in several positions. Keep the mounting surfaces clean and dry, and check the protectors after rough trips for loose fasteners, cracked welds or paint lifting at the edges.
Specifications
| Brand | Warrior |
|---|---|
| Part number | S90802 (also shown as W/IS90802) |
| UPC | 634146608020 |
| Product type | Front fender rock protectors |
| Material | 12-gauge steel |
| Finish | Smooth black |
| Quantity | Sold as a pair |
| Category | Fender deflector |
| Application | 87-95 Wrangler YJ |
| Signal light cutouts | Where applicable |
| Fitment type | Direct fit |
Vehicle fitment
The stored manufacturer fitment list for the Warrior S90802 covers the 1987-1995 Jeep Wrangler (YJ) (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport).
Only the 1987-1995 Wrangler (YJ) is listed. Other Wrangler generations such as the TJ and JK are not included in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test fit the part before final installation, and follow the drilling, painting and mounting steps carefully.
- Clean and dry the mounting surfaces, and check clearance to tires through full steering and suspension travel.
- Tighten fasteners to the specified torque, and use thread locker or sealant only where the steps call for it.
- Check local regulations on tire coverage and exterior equipment.
- Re-check the hardware after the first miles of driving and at regular service intervals.
What’s included
A pair of front fender rock protectors.
Not included: Confirm what is in the box matches your installation plan before starting.









